Roland FP-7 用户指南
46
Performing
You can change the split point (the key at which the keyboard is divided).
The split point can be set to any value from B1 through B6.
This is set to “F 3” when the instrument is turned on.
This setting remains in effect until you turn off the power.
The split point can be set to any value from B1 through B6.
This is set to “F 3” when the instrument is turned on.
This setting remains in effect until you turn off the power.
fig.SplitPoint-3-e.eps_77
fig.Panel-Split-4.eps
1.
Hold down the [Split] button and press a key set as the split point.
The key you pressed becomes the split point, and appears in the display.
fig.d-spltpoint.eps
The key being used as the split point belongs to the left-hand section of the keyboard.
The display will return to its previous state when you release the [Split] button.
The display will return to its previous state when you release the [Split] button.
The name of the lower tone is displayed while you hold down the [Split] button.
Changing the Keyboard’s Split Point
Split Point (Power-up default: F 3)
Range in which you can specify the split point (B1–B6)
C1
B1
B6
A0
C2
C3
C4
C5
C6
C7
C8
FP-7-e.book 46 ページ ２００７年７月１２日 木曜日 午後３時４７分