Roland GW-7 业主指南
17
Performance Functions and Effects
The Bender/Modulation lever located at the left of the keyboard can
be used to apply two types of effect to the sound you’re playing in
Keyboard mode.
be used to apply two types of effect to the sound you’re playing in
Keyboard mode.
Pitch Bend
is an effect that lowers the pitch of the sound you’re
playing when you move the lever toward the left, or raises it
when you move the lever toward the right.
when you move the lever toward the right.
Modulation
is an effect that applies vibrato to the sound you’re
playing when you push the lever away from yourself.
If the MFX type is
ROTARY
, this will switch the rotational
speed instead of Modulation.
If you press the lever away from yourself while moving it to left or
right, both effects will be applied at the same time.
right, both effects will be applied at the same time.
You can adjust the range of the pitch change. For details, refer to
“P.Bend Range” (p. 25)
“P.Bend Range” (p. 25)
You can connect a separately available foot switch (Boss FS-5U) or a
separately available expression pedal (Roland EV-5) to the
separately available expression pedal (Roland EV-5) to the
CONTROL PEDAL
jack on the rear panel.
You can assign a variety of functions to this pedal. For details,
refer to “Pedal” (p. 25).
refer to “Pedal” (p. 25).
By selecting a preset performance, you can quickly recall settings
that are appropriate for the song you’re playing.
When you select a preset performance, settings for the following
items will be recalled.
that are appropriate for the song you’re playing.
When you select a preset performance, settings for the following
items will be recalled.
• Music style
• Tempo
• Tone for the keyboard mode
• Effect (Chorus, Reverb)
• Band type
• Keyboard touch
• Tempo
• Tone for the keyboard mode
• Effect (Chorus, Reverb)
• Band type
• Keyboard touch
If MODE [PERFORM] is lit, you will hear a string sound and a
chord bass sound when you play the left-hand area of the
keyboard.
chord bass sound when you play the left-hand area of the
keyboard.
1.
Press MODE [PERFORM] so the button is lit.
2.
Turn the VALUE dial to select the desired performance
setting.
setting.
If you want to select a user performance, press [USER] so the
button is lit.
button is lit.
In the screen,
Pf001–Pf110
indicates preset performances, and
Uf001–Uf032
indicates user performances.
You can edit the settings of a performance, and store them as a user
performance.
performance.
1.
Press [FUNCTION].
2.
Use SELECT [
][
] to get the screen to indicate “Edit
Perform?”, and press [ENTER].
If you press [EXIT], you’re returned to the previous screen.
3.
Use SELECT [
][
] to select a parameter, and turn the
VALUE dial to edit the value of that parameter.
1.
Press [FUNCTION].
2.
Use SELECT [
][
] to get the screen to indicate “Write
Perform?”
3.
Press [ENTER]; the screen will indicate “Perform Num:
Uf001.”
Uf001.”
4.
Turn the VALUE dial to select the desired destination
(Uf001–Uf032), and then press [ENTER].
(Uf001–Uf032), and then press [ENTER].
5.
Input a name for your user performance.
Use SELECT [
][
] to move the cursor, and turn the
VALUE dial to change each character.
6.
Press [ENTER]; the screen will prompt “Write Sure?”
7.
Press [ENTER] to save the performance.
If you press [EXIT], you’re returned to the previous screen
without the performance being saved.
without the performance being saved.
Pitch Bend and Modulation
Assignable Pedal
Using Preset Performances
Pitch falls
Pitch rises
Modulation
Selecting a Performance
Editing a Performance
Saving a Performance
GW-7_e.book 17 ページ ２００５年２月１６日 水曜日 午前８時４８分