Roland GW-7 安装指导

 

Entry messages (Controller number 6) to specify the value of the specified parameter. Once
an NRPN parameter has been specified, all Data Entry messages received on that channel
will modify the value of that parameter. To prevent accidents, it is recommended that you
set RPN Null (RPN Number = 7FH 7FH) when you have finished setting the value of the
desired parameter. Refer to “5. Supplementary material”, Examples of actual MIDI
messages [Example 4] (p. 18). On the GW-7, Data entry LSB (Controller number 38) of
NRPN is ignored, so it is no problem to send Data entry MSB (Controller number 6) only
(without Data entry LSB).

On the GW-7, NRPN can be used to modify the following parameters.

NRPN

Data entry

MSB LSB

MSB

Function and range

01H 08H

mmH

Vibrato Rate (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 09H

mmH

Vibrato Depth (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 0AH

mmH

Vibrato Delay (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 20H

mmH

TVF Cutoff Frequency (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 21H

mmH

TVF Resonance (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 63H

mmH

TVF&TVA Envelope Attack Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 64H

mmH

TVF&TVA Envelope Decay Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

01H 66H

mmH

TVF&TVA Envelope Release Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)

18H rrH

mmH

Drum Instrument Pitch Coarse (relative change)
rr: Drum Instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63 semitone)

1AH rrH

mmH

Drum Instrument TVA Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)

1CH rrH

mmH

Drum Instrument Panpot (absolute change)
rr: Drum Instrument note number
mm: 00H, 01H - 40H - 7FH (random, left - center - right)

1DH rrH

mmH

Drum Instrument Reverb Send Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)

1EH rrH

mmH

Drum Instrument Chorus Send Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)

*

Parameters marked “relative change” will change relatively to the preset value(40H).
Even among different GS devices, “relative change” parameters may sometimes differ in
the way the sound changes or in the range of change.

*

Parameters marked “absolute change” will be set to the absolute value of the parameter,
regardless of the preset value.

*

Data entry LSB (llH) is ignored.

 

❍

 

Status

2nd byte

3rd byte

BnH

65H

mmH

BnH

64H

llH

n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN

*

Not received when Rx.RPN = OFF.

*

The value specified by RPN will not be reset even by messages such as Program Change
or Reset All Controller.

**

 

**

The RPN (Registered Parameter Number) messages are expanded control changes, and each
function of an RPN is described by the MIDI Standard.
To use these messages, you must first use RPN (Controller number 100 and 101, their order
does not matter) to specify the parameter to be controlled, and then use Data Entry
messages (Controller number 6, 38) to specify the value of the specified parameter. Once an
RPN parameter has been specified, all Data Entry messages received on that channel will
modify the value of that parameter. To prevent accidents, it is recommended that you set
RPN Null (RPN Number = 7FH 7FH) when you have finished setting the value of the
desired parameter. Refer to “5. Supplementary material”, Examples of actual MIDI
messages [Example 4] (p. 18).

On the GW-7, RPN can be used to modify the following parameters.

RPN

Data entry

MSB LSB

MSB LSB

Function and range

00H 00H

mmH llH

Pitch Bend Sensitivity
mm: 00H - 18H (0 - 24 semitones), 
Initial value = 02H (2 semitones)
ll: ignored (processed as 00H)
specify up to 2 octaves in semitone steps.

00H 01H

mmH llH

Channel Fine Tuning
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.99 cents), 
Initial value = 40 00H (+/- 0 cent)
Refer to “5. Supplementary material”, About the Tuning (p. 19).

00H 02H

mmH llH

Channel Coarse Tuning
mm: 28H - 40H - 58H (-24 - 0 - +24 semitones), 
Initial value = 40H (+/- 0 semitone)
ll: ignored (processed as 00H)

00H 05H

mmH llH

Modulation Depth Range
mm: 00H - 04H (0 - 4 semitones)
ll: 00H - 7FH (0 - 100 cents), 100/128 Cent/Value

7FH 7FH

--- ---

RPN null
Set condition where RPN and NRPN are unspecified. The data
entry messages after set RPN null will be ignored. (No Data entry
messages are required after RPN null). Settings already made will
not change.
mm, ll: ignored

 

●

 

Status

2nd byte

CnH

ppH

n = MIDI channel number: 0H - FH (ch.1 - 16)
pp = Program number: 00H - 7FH (prog.1 - prog.128)

*

Not received when System: Prog TxRx = OFF. (Initial value is ON)

*

Not received when Rx.PROGRAM CHANGE = OFF. (Initial value is ON)

 

●

 

Status

2nd byte

DnH

vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Channel Pressure: 00H - 7FH (0 - 127)

*

Not received when Rx.CH PRESSURE (CAf) = OFF. (Initial value is ON)

*

The resulting effect is determined by System Exclusive messages. With the initial
settings there will be no effect.

 

●

 

Status

2nd byte

3rd byte

EnH

llH

mmH

n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)

*

Not received when System: P.Bend TxRx = OFF. (Initial value is ON)

*

Not received when Rx.PITCH BEND = OFF. (Initial value is ON)

*

The resulting effect is determined by System Exclusive messages. With the initial
settings the effect is Pitch Bend.

 

■

 

●

 

Status

2nd byte

3rd byte

BnH

78H

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

When this message is received, all currently sounding notes on the corresponding
channel will be turned off immediately.