Roland fp-4 用户指南

 

Recording

 

Recording will stop.
The “USr” indication will change to “USr.” when you stop recording. The dot “.” in the lower right 
of the display indicates that a previously recorded performance exists.

 

fig.disp.eps

 

The recorded performance will play back.

 

The recorded performance will disappear when you turn off the power. If you want to 
keep the performance you recorded, you must save it in internal memory. Refer to 
“Saving the Songs You Record” (p. 76).

You can save your recorded songs on an external sequencer or computer. Refer to 
“Connecting to MIDI Devices” (p. 99) and “Connecting to a Computer via the USB 
(MIDI) Connector” (p. 98).

You can change the tone used in recording.
→ “Performing with a Variety of Sounds” (p. 28)

You can change the tempo and set the beat for the song.
➝ “Changing the Tempo” (p. 41)
➝ “Changing the Beat of Metronome” (p. 91)

You can use the FP-4’s metronome function.
In this case, the metronome sound is not recorded.
➝ “Performing with the Metronome” (p. 40)

When you record only a keyboard performance, the performance will be assigned to the 
track buttons as follows.

Normal performance (playing a single 
sound from the entire keyboard)

The performance is recorded to the Track [2] button.

The performance is recorded to the Track [2] button.

The Lower Tone is recorded to the Track [1] button, 
and the Upper Tone to the Track [2] button.

FP-4-e.book 67 ページ ２００７年５月２４日　木曜日　午後７時１０分