Roland fp-4 用户指南

下载
页码 140
 
72
 
Recording
 
FP-4’s Recorder has three Track buttons.
When you press the [Rec] button, all Track buttons are set to be recorded, but by 
selecting Track buttons that are not to be recorded, you can then record only on the 
specific Track buttons you want.
You can play each hand of your performance separately, for example recording the left-
hand part on the Track [1] button and the right-hand part on the Track [2] button. You 
can also re-record just a specific part of a previously recorded performance.
 
fig.Panel-RecTrack.eps
 
 
Performance Settings
 
1.
 
Press the [Rec] button.
 
The [Rec] button will light, the [Play] button will blink, and the instrument will enter recording 
standby mode.
If you decide not to record, press the [Rec] button once again.
 
2.
 
Press the button of the track you want to record, so the button is blinking.
 
Recording Selected Track Buttons
 
Track buttons
Description
Blinking
 
The performance will be recorded. 
If performance data already exists, the existing performance will be erased 
and replaced as the new recording proceeds.
 
Lit
 
The performance will not be recorded. 
During recording, the performance located at this track button will play back.
 
Unlit
 
The performance will not be recorded. 
This track does not contain performance data.
FP-4-e.book 72 ページ 2007年5月24日 木曜日 午後7時10分