Roland g-70 业主指南

G-70 Music Workstation 

r

Split means that the keyboard is divided into two 
halves. You can use the LW1, LW2 and MBS parts in the 
left half and the UP1, UP2, UP3 parts in the right. (It is 
also possible to use an additional split between UP1/
UP2 and UP3, see “Upper 3 Split” on p. 90.) 

Here’s how to activate the SPLIT keyboard mode:

(1) Press the KBD MODE [SPLIT] button.

(2) Press the PART ON/OFF buttons of the parts (LW2, 

LW1, etc.) you want to play via the keyboard and 
switch off the parts you do not need.
If a part is on, its button lights.

Note: If you like, you can activate a Hold function for the 
LW1/2 parts. That way, briefly pressing the notes to be played 
by the LW1/2 parts is enough. The Arranger has a similar func-
tion (called ARR Hold). See also “Lower Hold” on p. 92.

Note: If none of the PART ON/OFF buttons lights, the notes 
you play on the keyboard will not be audible. (It would, how-
ever, be possible to go on controlling the Arranger.)
Note: Your settings can be written to a User Program and 
recalled at a later stage. See p. 111.

■Setting the split point

When the [SPLIT] button lights, the keyboard is split in 
two halves. The split point is located at the C key 
below the brown EFFECT slider. This key is called the 
“C4”:

This split point applies both to the chord recognition 
area of the Arranger and the SPLIT keyboard mode.

There may be situations where the automatically 
assigned range is not what you need. In that case, 
you can change the split point:

(1) Press and hold the KBD MODE [SPLIT] button or the 

SPLIT field in the display.

The display now looks more or less as follows:

(2) Use the MAIN SPLIT POINT [√][®] fields to select the 

new split point.
The setting range is F1~F

#7. The orange keys in the 

display refer to the right half. As you can see, the 
“SPLIT POINT” is the lowest note of the right half.

Note: Your settings can be written to a User Program and 
recalled at a later stage. See p. 111.

Whole means that all keys trigger the same part(s). 
There is thus no split. You can assign up to six parts 
to the entire keyboard: MBS, LW1, LW2, UP3, UP2 and 
UP1.

(1) Press the KBD MODE [WHOLE] button.

(2) Press the PART ON/OFF buttons of the parts (MBS, 

LW2, LW1, etc.) you want to play via the keyboard 
and switch off the parts you do not need.

If a part is on, its button lights.

Note: If none of the PART ON/OFF buttons lights, the notes 
you play on the keyboard will not be audible. (It would, how-
ever, be possible to go on controlling the Arranger.)

By the way: selecting WHOLE does not mean that the 
Arranger is automatically switched off or can no 
longer be used. See “Arranger Type (chord mode)” on 
p. 80 for details.

Note: Your settings can be written to a User Program and 
recalled at a later stage. See p. 111.

LW1, LW2, MBS

UP1, UP2, UP3

UP1, UP2, UP3

—OR—