Roland HP103 业主指南

Before You Start Playing

Connecting the Pedal Cord

Connect the pedal cord to the Pedal jack on the bottom

panel of the instrument, at the rear.

fig.00-01

Connecting the Power Cord

Insert the included power cord into the AC inlet on the

bottom panel of the instrument, at the rear.

Plug the power cord into a power outlet.

NOTE

Be sure to use the supplied power cord.

fig.00-02

Opening/Closing the Lid

To open the lid, use both hands to lift it lightly, and

slide it away from yourself.

To close the lid, pull it gently toward yourself, and

lower it softly after it has been fully extended.

fig.00-05

NOTE

When opening and closing the lid, be careful not to let

your fingers get caught. If small children will be using

the HP103, adult supervision should be provided.

NOTE

If you need to move the piano, make sure the lid is

closed first to prevent accidents.

Setting Up the Music Rest

Insert the included music rest attachment screws into

the screw holes on top of the HP103, and tighten the

screws slightly.

fig.00-03

Put the music rest between the screws and the HP103’s

body.

While supporting the music rest with one hand, secure

it in place by turning the screws.

When attaching the music rest, support it firmly with
one hand to make sure that you don’t drop it. Be careful,
so you don’t get your fingers pinched.

To remove the music rest, support it with one hand

while loosening the screws.

After removing the music rest, don’t forget to retighten
the screws.

NOTE

Do not apply excessive force to the installed music rest.

NOTE

Be sure to use the supplied screws for attaching the

music rest.

NOTE

Before moving the piano, be sure to remove the music

rest to prevent accidents.

HP103_e.book 10 ページ２００５年３月２４日　木曜日　午後４時５８分