Roland JUNO-G 业主指南
110
Editing a Song (Audio Track)
• 2 Clear Track
The selected audio track will be erased. (The track name and
setup data will also revert to its default settings.)
setup data will also revert to its default settings.)
3.
Press [F6 (SELECT)].
A message will ask you for confirmation.
4.
Press [F6 (EXEC)].
*
If you decide to cancel, press [F5 (CANCEL)].
*
This operation will not change the length of the song.
Here’s how to assign a name to an audio track (you can use up to
twelve characters).
twelve characters).
1.
Use to select the audio track that you want to name.
2.
Hold down [SHIFT] and press [F2 (TRK NAME)].
The AUDIO TRACK NAME screen will appear.
3.
Assign the desired name.
*
4.
Press [F6 (WRITE)] to confirm the name.
This operation deletes the currently selected sample event and also
unloads it from the sample list.
unloads it from the sample list.
1.
Hold down [SHIFT] and press [F3 (UNLOAD)].
A message will ask you for confirmation.
2.
Press [F6 (EXEC)] to execute.
*
If you decide to cancel, press [F5 (CANCEL)].
This operation lets you specify a region, then have the performance
of all audio tracks and MIDI tracks in that region be combined into a
single track.
of all audio tracks and MIDI tracks in that region be combined into a
single track.
After creating a sample in this way, you can save it on your
computer as the audio data for a single song.
computer as the audio data for a single song.
1.
Hold down [SHIFT] and press [F4 (MIXDOWN)].
The [REC] indicator will blink, and the Mixdown Standby
window will appear.
window will appear.
2.
In the Mixdown Standby window, specify the region that
you want to mix down.
you want to mix down.
Use [
] [
] to move the cursor to each parameter, and turn
the VALUE dial or use [INC][DEC] to set the value.
• Start Point
Specify the measure at which the mixdown is to start.
• End Point
Specify the measure at which the mixdown is to end.
3.
Press [PLAY] or [F6 (START)].
The Mixdown Standby window will close, and [REC] indicator
will change from blinking to lit, and the mixdown will begin.
will change from blinking to lit, and the mixdown will begin.
When the mixdown begins, the Mixdown window will appear.
To close the Mixdown window, press [F6 (CLOSE)] or [PLAY].
To open it again, press [PLAY].
To open it again, press [PLAY].
4.
The mixdown will end automatically.
The [REC] indicator will go out.
*
You can also press [STOP] to stop before you reach the end.
5.
The Mixdown Sample Assign window will open.
Use [STOP] + [BWD] (TOP), [BWD][FWD] or [
] [
] [ ] [ ]
to specify the location at which the sample event will be
assigned.
assigned.
6.
Press [F6 (ASSIGN)].
A sample event that plays the mixed-down sample will be
assigned to the audio track, and you will return to the previous
screen.
assigned to the audio track, and you will return to the previous
screen.
• If you press [F4 (UNLOAD)], the samples you just mixed down
will be deleted (unloaded). A message will ask you for
confirmation; press [F6 (EXEC)] to confirm.
confirmation; press [F6 (EXEC)] to confirm.
• If you want to neither assign nor unload the sample, press [F5
(CANCEL)].
*
Even if you cancel, the mixed-down sample data itself will remain in
the sample list.
the sample list.
If the sample memory is full, the “Sample Memory Full” error
will be displayed. In this case, you can either delete unneeded
sample data or install more memory (p. 176).
will be displayed. In this case, you can either delete unneeded
sample data or install more memory (p. 176).
1.
Hold down [SHIFT] and press [F5 (Zoom <)] (reduce) / [F6
(Zoom >)] (magnify).
(Zoom >)] (magnify).
You can zoom in/out to display between two and thirty-two
measures in the screen.
measures in the screen.
Naming an Audio Track (Track Name)
Unloading a Sample (Unload Sample)
Combining the Contents of the Tracks
into One Audio Track (Mixdown)
Zooming In and Zooming Out in
the Display
JUNO-G_e.book 110 ページ ２００６年７月３１日 月曜日 午後２時４９分