Roland JUNO-G 业主指南
124
Editing a Audio Phrase (Sample)
A edited sample, as well as any changes you’ve made in the settings
for a sample will be lost as soon as you turn off the power. If you
want to keep such data, you must save it as follows.
for a sample will be lost as soon as you turn off the power. If you
want to keep such data, you must save it as follows.
1.
2.
Select the sample that you want to save.
If you want to select two or more samples, press [F2 (MARK)] to
add a check mark (
add a check mark (
✔
) to the samples that you want to select.
To remove the check mark from a selected sample, select and
press [F2 (MARK)] again.
press [F2 (MARK)] again.
If you hold down [SHIFT] and press [F4 (SET ALL)], a check
mark will be added to all samples of the selected group.
mark will be added to all samples of the selected group.
If you hold down [SHIFT] and press [F3 (CLR ALL)], check
marks will be removed from all selected samples.
marks will be removed from all selected samples.
3.
Press [WRITE].
The WRITE MENU screen will appear. Make sure that
“Sample” is highlighted.
“Sample” is highlighted.
fig.SampleWrite
4.
Press [F3 (SAMPLE)] or [ENTER].
5.
Assign a name to the sample.
6.
When you have finished inputting the name, press [F6 (WRITE)].
A screen will appear allowing you to select the write-
destination sample.
destination sample.
fig.SampleWrite2
7.
Use the VALUE dial, [INC] [DEC], or [
] [
] to select the
write destination sample number.
The write destination can be either the JUNO-G’s internal user
memory (User), or a memory card (Card).
memory (User), or a memory card (Card).
8.
Press [F6 (WRITE)].
A message will ask you for confirmation.
9.
Press [F6 (EXEC)] to execute the save operation.
*
To cancel the operation, press [F5 (CANCEL)].
Never switch off the JUNO-G while data is being saved.
• You can’t save by overwriting another sample.
• Stereo samples must be saved to two consecutive sample
numbers.
Saving a Sample (Write)
If you have selected more than one sample, a message will ask
you to confirm the writing operation. Samples will be written
into the identical number corresponding to each bank of the
sample list. Sample names will be assigned automatically. If
you want to write the samples, press [F6 (EXEC)]. If you decide
to cancel, press [F5 (CANCEL)].
you to confirm the writing operation. Samples will be written
into the identical number corresponding to each bank of the
sample list. Sample names will be assigned automatically. If
you want to write the samples, press [F6 (EXEC)]. If you decide
to cancel, press [F5 (CANCEL)].
JUNO-G_e.book 124 ページ ２００６年７月３１日 月曜日 午後２時４９分