Roland KR-115 业主指南

 

❍

 

■

 

The effect of smoothly raising or lowering the pitch of a 
played note is called the “bender effect.”

You can assign the bender function to a pedal, then apply the 
bender effect by depressing and releasing the pedal.

You can also make a setting that determines how much the 
pitch of the note changes when you apply the bender. The 
maximum range of change in pitch is called the “bend 
range.”

Touch 

 to switch the screens.

 

fig.d-pedalset.eps_50

 

Touch <Bend Range> 

 to adjust the bend range 

setting.

You can set this to any value within a range of 1 to 12 (in 
half-tone steps, up to one octave).

 

Adjusts the overall volume.

 

When the pedal is pressed during a layer 
performance, the Tone volume changes 
between two levels, depending on how 
firmly the pedal is pressed.
Pressing the pedal with “Pedal EX1” 
selected increases the layer Tone volume. 
The layer Tone is played at a fixed volume, 
regardless of how forcefully the keys are 
played.

 

Pressing the pedal with “Pedal EX2” 
selected increases the layer Tone volume, 
while the volume of the right-hand Tone is 
decreased. The layer Tone is played at a 
fixed volume, regardless of how forcefully 
the keys are played.

 

Pressing the pedal with “Pedal EX3” 
selected increases the layer Tone volume.

 

Pressing the pedal with “Pedal EX4” 
selected increases the layer Tone volume, 
while the volume of the right-hand Tone is 
decreased.

KR117_115_r_e.book 169 ページ ２００６年７月５日　水曜日　午前１１時３分