Roland KR-115 业主指南

 

This is a four-band stereo equalizer (low, high).

 

This is a stereo spectrum.

 

Adds sparkle and tightness to the sound.

 

Adds a special effect to the sound by cutting the 
volume in varying ranges.

 

Boosts the volume of the lower range, creating 
powerful lows.

 

This is a low-cut filter. It cuts the low-frequency 
component.

 

Creates a soft distortion similar to that produced by 
vacuum tube amplifiers.

 

Produces a more intense distortion than Overdrive.

 

This is an overdrive that provides heavy distortion.

 

This is a distortion effect that provides heavy dis-
tortion.

 

Simulates the speaker type and mic settings used to 
record the speaker sound.

 

This is an effect that simulates the sound of a guitar 
amplifier.

 

A phase-shifted sound is added to the original 
sound and modulated.

 

Extremely high settings of the phase difference 
produce a deep phaser effect.

 

A phaser that continues raising/lowering the fre-
quency at which the sound is modulated.

 

It produces a metallic resonance that rises and falls 
like a jet airplane taking off or landing.

 

This applies a 3D effect to the flanger sound.

 

A flanger that lets you apply an effect independent-
ly to the low-frequency and high-frequency ranges.

 

Cyclically controls a filter to create cyclic change in 
timbre.

 

Adds a vowel character to the sound, making it 
similar to a human voice.

 

This is an effect that applies amplitude modulation 
(AM) to the input signal, producing bell-like 
sounds.

 

Cyclically modulates the volume to add tremolo ef-
fect to the sound.

 

Cyclically modulates the stereo location of the 
sound.

 

By applying successive cuts to the sound, this effect 
turns a conventional sound into a sound that ap-
pears to be played as a backing phrase.

 

Flattens out high levels and boosts low levels, 
smoothing out fluctuations in volume.

 

Compresses signals that exceed a specified volume 
level, preventing distortion from occurring.

 

This is a stereo chorus.

 

Uses a six-phase chorus (six layers of chorused 
sound) to give richness and spatial spread to the 
sound.

 

This is a chorus effect with added Tremolo (cyclic 
modulation of volume).

 

Produces a transparent chorus effect.

 

This applies a 3D effect to the chorus sound.

 

A chorus effect that lets you apply an effect inde-
pendently to the low-frequency and high-frequen-
cy ranges.

 

The Rotary effect simulates the sound of the rotary 
speakers often used with the electric organs of the 
past.

 

This type provides modified response for the rota-
ry speaker, with the low end boosted further.

 

It comprises vibrato/chorus, overdrive, and rotary 
effects.

 

This is a stereo delay. The delay time is set to a 
length of one eighth note.

 

This is a stereo delay. The delay time is set to a 
length of one quarter-note triplet.

 

This is a stereo delay. The delay time is set to a 
length of one dotted eighth note.

 

This is a stereo delay. The delay time is set to a 
length of one quarter note.

 

This is a stereo delay. The delay time is set to a 
length of one half note.

 

This is a monaural delay.

 

Adds modulation to the delayed sound.

 

Produces three delay sounds; center, left and right.

 

This applies a 3D effect to the delay sound.

 

A virtual tape echo that produces a realistic tape 
delay sound.

 

This is a reverse delay that adds a reversed and de-
layed sound to the input sound.

 

This is an effect that intentionally degrades the 
sound quality for creative purposes.

 

This applies a telephone sound.

 

This is a special type of reverb in which the rever-
berant sound is cut off before its natural length.

 

This effect connects an overdrive and a chorus in 
series.

 

This effect connects an overdrive and a flanger in 
series.

 

This effect connects an overdrive and a delay in se-
ries.

 

This effect connects an distortion and a chorus in 
series.

 

This effect connects an distortion and a flanger in 
series.

 

This effect connects an distortion and a delay in se-
ries.

 

This effect connects an enhancer and a chorus in se-
ries.

 

This effect connects an enhancer and a flanger in se-
ries.

 

This effect connects an enhancer and a delay in se-
ries.

 

This effect connects a chorus and a delay in series.

 

This effect connects a flanger and a delay in series.

 

This effect connects a chorus and a flanger in series.

 

On an acoustic piano, holding down the damper 
pedal allows other strings to resonate in sympathy 
with the notes you play, creating rich and spacious 
resonances. This effect simulates these damper res-
onances.

KR117_115_r_e.book 209 ページ ２００６年７月５日　水曜日　午前１１時３分