Roland KR-115 业主指南

 

The function that sounds the lowest note of a fingered chord 
as the bass tone is called “Leading Bass.” When this function 
is turned on, the Bass Tone changes when chord inversions 
are used. Usually the tonic of the chord you play sounds as 
the bass tone.

 

This adds a sort of spinning effect to the organ sound, similar 
to the sound when a rotary speaker is used.

Changing the speed increases or decreases the speed of this 
spinning effect.

 

❍

 

→

Using the “Bend Up” or “Bend Down” function during a 
split performance (p. 31) changes the pitch of sounds in the 
right-hand side of the keyboard. Additionally, the range in 
which the pitch can change when the Bender effect is used is 
called the “bend range”; refer to “Changing the Bend Range 
(Pedal Setting)” (p. 169).

 

This starts Automatic Accompaniment 
with a fade-in (where the volume gets 
progressively louder), ends it with a fade-
out (where the volume gets progressively 
softer), then stops.

 

This switches the speed of the rotary effect* 
when you perform with an organ tone.

 

While the pedal or Performance Pad is held 
down, the pitch of the sound drops 
temporarily, returning to the original pitch 
when the pedal or Pad is released. This can 
be effective for simulating the performance 
of instruments like a Hawaiian guitar.

 

Performs the same function as the [

 

 

If a song is stopped with the notation 
shown in the KR display, the notation in 
the KR display scrolls to the next page 
when you press the pedal.

 

If a song is stopped with the notation 
shown in the KR display, the notation in 
the KR display scrolls to the preceding 
page when you press the pedal.

 

If a song is stopped with the notation 
shown in the external display, the notation 
in the external display scrolls to the next 
page when you press the pedal.

 

If a song is stopped with the notation 
shown in the external display, the notation 
in the external display scrolls to the 
preceding page when you press the pedal.

 

During Punch-in Recording, this starts and 
stops recording (p. 142).

 

You can set the tempo according to the 
interval at which the pedal or pad is 
pressed (p. 95).

 

Pressing the pedal during playback of a song 
stops the playback. When the pedal is 
released, playback resumes from the 
beginning of the measure that was playing 
when the pedal was pressed. When the pedal 
is pressed in rapid succession, the playback 
will resume backs up the same number of 
measures as the number of times the pedal is 
pressed.

 

The pedal functions as a sostenuto pedal 
(p. 22).

 

 

Applies a damper pedal effect to the sounds 
in the left-hand side of the keyboard during a 
split performance.

 

This raises the pitch of notes you play on the 
keyboard.

 

This lowers the pitch of notes you play on the 
keyboard.

 

When the pedal is pressed during a layer 
performance, the Tone volume changes 
between two levels, depending on how firmly 
the pedal is pressed.
Pressing the pedal with “Pedal EX1” selected 
increases the layer Tone volume. The layer 
Tone is played at a fixed volume, regardless of 
how forcefully the keys are played.

 

Pressing the pedal with “Pedal EX2” selected 
increases the layer Tone volume, while the 
volume of the right-hand Tone is decreased. 
The layer Tone is played at a fixed volume, 
regardless of how forcefully the keys are 
played.

 

Pressing the pedal with “Pedal EX3” selected 
increases the layer Tone volume.

 

Pressing the pedal with “Pedal EX4” selected 
increases the layer Tone volume, while the 
volume of the right-hand Tone is decreased.

KR117_115_r_e.book 168 ページ ２００６年７月５日　水曜日　午前１１時３分