Roland juno-stage 用户指南

 

You can use the force with which keys are played to control the way each waveform is played.

 

fig.TMT-V.e

 

0–127

Volume of the waveform

 

L64–0–63R

Left/right position of the waveform

 

OFF, ON

Use this setting to cause the waveform’s panning to change randomly each time a key is pressed 
(ON) or not (OFF).

 

OFF, ON, REVS

This setting causes panning of the waveform to be alternated between left and right each time a 
key is pressed.

Set this to “ON” to pan the wave according to the Alternate Pan Depth parameter (p. 130) 
settings, or to “REVS” when you want the panning reversed.

 

-48–+48

Pitch of the waveform’s sound (in semitones, +/-4 octaves)

 

-50–+50

Pitch of the waveform’s sound (in 1-cent steps; one cent is 1/100th of a semitone)

 

OFF, ON, RAN

Determines whether a different waveform is played (ON) or not (OFF) depending on the force with 
which the key is played (velocity).

 

 The rhythm tone’s constituent waveforms will sound randomly, regardless of any Velocity 

messages.

 

0–127

Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity 
lower than Velo Range Lower.

If you don’t want the waveform to sound at all, set this parameter to “0.”

 

1–(UPPER)

Specifies the lowest velocity at which the waveform will sound.

 

(LOWER)–127

Specifies the highest velocity at which the waveform will sound.

 

0–127

Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity 
greater than Velo Range Upper.

If you don’t want the waveform to sound at all, set this parameter to “0.”

Velo Range Lower

Velo Range Upper

Velo Fade Lower

Velo Fade Upper

Level

The waveform sounded 
when you play softly

The waveform sounded 
when you play strongly

Velocity

JUNO-STAGE_e.book 127 ページ ２００８年１０月１７日　金曜日　午後１２時２７分