Roland juno-stage 用户指南
145
Chapter 11. Other Settings
Here you can make “System settings” that affect the operation of the entire JUNO-STAGE, such as the tuning and how MIDI messages will be
received.
received.
1.
Press [MENU].
The Top Menu window will appear.
2.
Use [
] [
] to choose “1. System” and press the [ENTER].
The System Menu screen will appear.
3.
Press one of the function buttons to select the setting that you
want to edit.
want to edit.
The setting screen for the selected button will appear.
If necessary, press a function button again to access the desired
setting screen.
setting screen.
4.
Use the cursor buttons to select to the parameter that you want to
set.
set.
5.
Use the VALUE dial or the [DEC] [INC] to set the value.
Changes you’ve made to the system settings will return to their original
state when you turn off the power. If you want to keep the changes
you’ve made, you must save them as follows.
state when you turn off the power. If you want to keep the changes
you’ve made, you must save them as follows.
1.
Access a system function setting screen.
2.
Press [7 (WRITE)].
A screen like the following will appear, and the settings will be
saved.
saved.
fig.disp-.eps
When the settings have been saved, you will return to the
previous screen.
previous screen.
System Settings
Procedure for Making System Settings
Saving the Changes You’ve Made to the
System Settings (WRITE)
JUNO-STAGE_e.book 145 ページ ２００８年１０月１７日 金曜日 午後１２時２７分