Roland juno-stage 用户指南
151
Chapter 11. Other Settings
[4 (RX)]
[5 (SYNC)]
[2 (CLICKOUT)]
[3 (PLAYER)]
Parameter
Value
Explanation
Receive Program Change
OFF, ON
Specifies whether Program Change messages will be received (ON) or not (OFF).
Receive Bank Select
OFF, ON
Specifies whether Bank Select messages will be received (ON) or not (OFF).
Receive Exclusive
OFF, ON
Specifies whether System Exclusive messages will be received (ON) or not (OFF).
Receive GM System On
OFF, ON
Specifies whether General MIDI System On messages will be received (ON) or not (OFF).
Receive GM2 System On
OFF, ON
Specifies whether General MIDI 2 System On messages will be received (ON) or not (OFF).
Receive GS Reset
OFF, ON
Specifies whether GS Reset messages will be received (ON) or not (OFF).
Parameter
Value
Explanation
Sync Mode
MASTER,
SLAVE,
REMOTE
SLAVE,
REMOTE
Specifies the synchronization signals that the JUNO-STAGE will follow.
MASTER
: The JUNO-STAGE will be the master. Choose this setting if you’re operating the
JUNO-STAGE by itself, without synchronizing it to any other device.
SLAVE
: The JUNO-STAGE will be the slave. Choose this setting if you want the JUNO-STAGE to
operate according to MIDI Clock messages received from an external device.
REMOTE
: The JUNO-STAGE will obey MIDI Start, Continue, and Stop messages from an external
device, but will use its own tempo setting.
Sync Output
OFF, ON
If this is ON, the JUNO-STAGE will transmit synchronization-related MIDI messages (MIDI Clock, Start,
Continue, Stop) to an external MIDI device.
Continue, Stop) to an external MIDI device.
* This cannot be set if Sync Mode is “SLAVE.”
Tempo Override
OFF, ON
If this is ON, switching performances will make the tempo change to the “Recommended Tempo”
specified for that performance.
specified for that performance.
System Menu [5 (CLICK/PLAYER)]
Parameter
Value
Explanation
Click Setting
Song/Click Output
Mode
Mode
CLICK, SONG
CLICK:
If SMF data is being played back, the SONG/CLICK OUT jack will output a click sound.
The SONG/CLICK OUT jack will output either the click sound (while playing back SMF data) or the
song (while playing back audio data).
The OUTPUT L/R jacks will output the song.
song (while playing back audio data).
The OUTPUT L/R jacks will output the song.
SONG:
The SONG/CLICK OUT jack will output the song.
The SONG/CLICK OUT jack will output the song.
The OUTPUT L/R jacks will not output the click or the song.
The OUTPUT L/R jacks will not output the click or the song.
* This setting is valid if the song is SMF data. If the song is audio data, the sound of the song will
always be output, regardless of this setting.
Click Level
0–10
Volume of the click
Click Sound
TYPE1–TYPE4
Sound type of the click
TYPE 1:
A conventional click sound (A bell will sound on the first beat.)
TYPE 2:
Clicks
TYPE 3:
Beeps
TYPE 4:
Cowbell
Level
Song/Click Output
Level
Song/Click Output
Level
0–127
Volume of the output from the SONG/CLICK OUT jack
Parameter
Range
Explanation
Song Player Level
Audio Level
Audio Level
0–127
Sets the volume at which audio files will be played by the song player.
SMF Level
0–127
Sets the volume at which SMF will be played by the song player.
JUNO-STAGE_e.book 151 ページ ２００８年１０月１７日 金曜日 午後１２時２７分