Roland juno-stage 用户指南
59
Chapter 3. Versatile Performance Functions
Adjusting the Level of the Low and High
Frequency Ranges
(MASTER EQ [LOW]/[HIGH] Knobs)
You can use these knobs to adjust the levels of the Low and High
Frequency ranges of the equalizer that is applied to the overall sound
(MASTER EQ).
Frequency ranges of the equalizer that is applied to the overall sound
(MASTER EQ).
Adding Reverberation ([REVERB] Knob)
You can add reverb (reverberation) to the sounds that you play from
the keyboard.
the keyboard.
By adding reverb, you can recreate the pleasant acoustics that are
typical of a performance in a concert hall or similar space.
typical of a performance in a concert hall or similar space.
This effect will be applied if “REVERB” is turned “ON” in the
EFFECT SWITCH window (p. 79).
EFFECT SWITCH window (p. 79).
Turning on [LOCK] will disable the seven SOUND MODIFY knobs so
that inadvertently moving these knobs during a performance will not
change your settings.
that inadvertently moving these knobs during a performance will not
change your settings.
1.
Press [LOCK] so it’s lit.
The Lock function will be turned on, and the SOUND MODIFY
knobs will be disabled.
knobs will be disabled.
2.
To cancel the Lock function, press [LOCK] so its illumination is
turned off.
turned off.
If the Lock function is on, the value of the parameters will not
change even if the knob positions are changed.
change even if the knob positions are changed.
You can assign various performance-related functions to a pedal that
is connected to the rear panel CONTROL PEDAL jack.
is connected to the rear panel CONTROL PEDAL jack.
Pedal such as expression pedals (sold separately), pedal switches (DP
series; sold separately), or foot switches (sold separately) can be
connected to the JUNO-STAGE.
series; sold separately), or foot switches (sold separately) can be
connected to the JUNO-STAGE.
1.
Press [MENU].
2.
Use [
] [
] to select “1. System,” and press [ENTER].
The System Menu window will appear.
3.
Press [3 (KBD/CTRL)].
4.
Press [3 (PEDAL)].
5.
Use [
] [
] to select the “Control Pedal Assign.”
6.
Use the VALUE dial or [DEC] [INC] to select the desired value.
7.
If you want to keep your settings, press [7 (WRITE)].
8.
Press [EXIT] to return to the previous screen.
Knob
Parameter
Value
Explanation
[LOW]
Low Gain
-15–0–+15
Adjusts the low range sound.
Turning the knob toward the
right will boost the low range
sound, while turning it toward
the left will attenuate the low
range sound.
Turning the knob toward the
right will boost the low range
sound, while turning it toward
the left will attenuate the low
range sound.
[HIGH]
High Gain
-15–0–+15
Adjusts the high range sound.
Turning the knob toward the
right will boost the high range
sound, while turning it toward
the left will attenuate the high
range sound.
Turning the knob toward the
right will boost the high range
sound, while turning it toward
the left will attenuate the high
range sound.
Mode
Parameter
Value
Explanation
[REVERB] knob
Performance
Reverb
Send
Level
Send
Level
0–127
Adjusts the amount of reverb.
Turning the knob toward the
right will deepen the reverb,
and turning it toward the left
will decrease the reverb.
Turning the knob toward the
right will deepen the reverb,
and turning it toward the left
will decrease the reverb.
Patch
Reverb
Output
Level
Output
Level
0–127
Disabling the Knobs ([LOCK])
Assigning a Function to the Pedal
(Control Pedal)
Value
Explanation
CC01–31, 33–95
Controller numbers 1–31, 33–95
BEND UP
The pitch will rise in semitone steps
(maximum 4 octaves) each time you
press the pedal.
(maximum 4 octaves) each time you
press the pedal.
BEND DOWN
The pitch will fall in semitone steps
(maximum 4 octaves) each time you
press the pedal.
(maximum 4 octaves) each time you
press the pedal.
AFTERTOUCH
Aftertouch
OCT UP
Each pedal press raises the key range
in octave steps (up to 3 octaves higher).
in octave steps (up to 3 octaves higher).
OCT DOWN
Each pedal press lowers the key range
in octave steps (up to 3 octaves lower).
in octave steps (up to 3 octaves lower).
START/STOP
The song or the rhythm pattern will
start/stop.
start/stop.
TAP TEMPO
Tap tempo (a tempo specified by the
interval at which you press the pedal).
interval at which you press the pedal).
PROGRAM UP
The next sound number will be selected.
PROGRAM DOWN
The previous sound number will be
selected.
selected.
FAVORITE UP
The favorite of the next number or bank
will be selected.
will be selected.
FAVORITE DOWN
The favorite of the previous number or
bank will be selected.
bank will be selected.
ARP SW
Arpeggio/Rhythm Pattern function on/
off
off
CHORD SW
Chord memory function on/off
JUNO-STAGE_e.book 59 ページ ２００８年１０月１７日 金曜日 午後１２時２７分