Roland kr-5 业主指南

 

❍

 

→

Using the “Bend Up” or “Bend Down” function during a 
split performance (p. 28) changes the pitch of sounds in the 
right-hand side of the keyboard. Additionally, the range in 
which the pitch can change when the Bender effect is used is 
called the “bend range”; refer to “Changing the Bend Range 
(Pedal Setting)” (p. 149).

 

■

 

The effect of smoothly raising or lowering the pitch of a 
played note is called the “bender effect.”

With the KR-7/5, you can assign the bender function to a 
pedal, then apply the bender effect by depressing and 
releasing the pedal.

You can also make a setting that determines how much the 
pitch of the note changes when you apply the bender. The 
maximum range of change in pitch is called the “bend 
range.”

 

fig.d-pedalset.eps_50

 

Touch <Bend Range> 

 to adjust the bend range 

setting.

You can set this to any value within a range of 1 to 12 (in 
half-tone steps, up to one octave).

 

Pressing the pedal during playback of a song 
stops the playback. When the pedal is 
released, playback resumes from the begin-
ning of the measure that was playing when 
the pedal was pressed. When the pedal is 
pressed in rapid succession, the playback 
will resume backs up the same number of 
measures as the number of times the pedal is 
pressed.

 

 

The pedal functions as a sostenuto pedal 
(p. 20).

 

Applies a damper pedal effect to the sounds 
in the left-hand side of the keyboard.

 

This raises the pitch of notes you play on the 
keyboard.

 

This lowers the pitch of notes you play on the 
keyboard.

 

When the pedal is pressed during a layer per-
formance, the Tone volume changes between 
two levels, depending on how firmly the 
pedal is pressed.
Pressing the pedal with “Pedal EX1” selected 
increases the layer Tone volume. The layer 
Tone is played at a fixed volume, regardless 
of how forcefully the keys are played.

 

Pressing the pedal with “Pedal EX2” selected 
increases the layer Tone volume.

 

Pressing the pedal with “Pedal EX3” selected 
increases the layer Tone volume, while the 
volume of the left-hand Tone is decreased. 
The layer Tone is played at a fixed volume, 
regardless of how forcefully the keys are 
played.

 

Pressing the pedal with “Pedal EX4” selected 
increases the layer Tone volume, while the 
volume of the right-hand Tone is decreased.

KR-7_5_e.book 149 ページ ２００４年７月７日　水曜日　午前１０時３分