Roland kr-5 业主指南

Before You

Start Playing

Before You Start Playing

Connect the Pedal Cable

Insert the pedal cable into the Pedal connector on the

rear panel of the KR-7/5.

fig.00-01

Connect the Speaker Cable

(KR-7)

As shown in the diagram, connect the speaker cable

leading from the speaker box of the stand to the speaker

connector located on the rear panel of the KR-7.

Push the speaker cable in until it clicks into position.

NOTE

Do not place containers holding liquids (such as flower vases),

insecticide, perfume, alcohol, or similar substances on top of this

piano.

The speakers of this piano are mounted beneath the upper surface,

and face upwards. Malfunctions or accidents may occur if liquids

contact any part of the speakers.

Connect the Power Cord

Insert the included power cable into the AC inlet on the

bottom panel of the KR-7/5, and then plug it into an

electrical outlet.

NOTE

Be sure to use the supplied power cord.

fig.00-02

Setting Up the Music Stand (KR-5)

fig.00-03

Gently raise the music stand, then secure it in place as

shown in the figure.

To collapse the stand, fold in the metal fittings while

supporting the stand with both hands and gently fold

down the stand.

NOTE

Do not apply excessive force to the music stand.

Setting Up the Music Stand (KR-7)

Grasping the music stand with both hands, lift it

toward you until its in the upright position.

Use the support on the back of the music stand to keep

the stand in place.

The angle of the music stand can be set to any of three
positions.

fig.mu_stand

KR-7 Rear

Speaker cable

Speaker connector

Clip portion

Speakers

(2)

(1)

KR-7_5_e.book 18 ページ２００４年７月７日　水曜日　午前１０時３分