Roland RD-700 业主指南
28
Getting Ready
Getting Ready
Adjusting the Display Contrast
(LCD Contrast)
The characters in the display may be difficult to view immediately after
turning on the power or after extended use; this may also be because of
where and how the display is situated. Follow the steps below to adjust the
display’s contrast.
turning on the power or after extended use; this may also be because of
where and how the display is situated. Follow the steps below to adjust the
display’s contrast.
fig.panel
1
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu1.eps_150
2
Press CURSOR [
] to select “0.System.”
3
Press CURSOR [
] to display the Edit screen.
fig.system1.eps_150
4
Press CURSOR [
] or [
] to move the cursor to the “LCD
Contrast” parameter.
5
Press [INC/YES] or [DEC/NO] to select the value (1–10).
The brightness of the display changes as the value is changed. Adjust the
contrast so that the display is easy to view.
contrast so that the display is easy to view.
The LCD CONTRAST
setting affects the RD-700
as a whole (i.e., is a system
setting). This setting
remains stored in memory
even while the power is off.
setting affects the RD-700
as a whole (i.e., is a system
setting). This setting
remains stored in memory
even while the power is off.
CONTROL
1,6
2,4
5
3
RD-700_e.book 28 ページ ２００４年４月２６日 月曜日 午前１１時５４分