Roland RD-700 业主指南

 

The RD-700 provides 468 types of Tones.

Each one of these individual sounds is called a tone.

Tones are assigned to the TONE SELECT buttons according to the tone 
category selected.

Try selecting and performing with a number of different tones.

 

fig.panel

 

Press ONE TOUCH [PIANO].

 

This selects a single tone to be played over the entire keyboard.

 

Press any of the TONE SELECT buttons to select the tone 
category.

 

Press [INC/YES] or [DEC/NO] to select the tone.

 

The TONE SELECT button for the selected category flashes.

 

Either press the flashing TONE SELECT button or play the 
keyboard.

 

The TONE SELECT button stops flashing and remains lit, and the selected 
tone is set.

Play the keyboard, and you will hear the selected tone.

The next time you choose this TONE SELECT button, the tone you’re 
selected here is played.

For more on the RD-700’s 
internal tones, refer to the 
“Tone List”

CONTROL

When changing tones in 
Layer mode (p. 42) or Split 
mode (p. 43), select the part 
for which the tone is to be 
changed with the PART 
SELECT buttons, without 
pressing the ONE TOUCH 
[PIANO] button. For 
details, refer to “Changing 
Tones in Layer and Split 

If [NUM LOCK] is turned 
on, the Tone Category 
cannot be selected with 
TONE SELECT button.
For details, refer to p. 37.

Tones selected with [RHY/
GM2] are registered in the 
following order: “Rhythm 
Sets,” “GM2 Rhythm Sets,” 
and “GM2 Tones.” Refer to 
the “Tone List” (p. 135).

RD-700_e.book 36 ページ ２００４年４月２６日　月曜日　午前１１時５４分