Roland RD-700 业主指南

 

You can make more detailed settings to fashion just the 
Tones you want using the piano Tone selected by pressing 
ONE TOUCH [PIANO] (p. 35).

This function is called “Piano Edit.”

The settings made in Piano Edit are stored to ONE TOUCH 
[PIANO].

 

When ONE TOUCH [PIANO] is pressed, all settings other 
than the Piano Edit settings are switched to their status at the 
time the RD-700’s power was turned on.

Store any arrangements of settings that you want to keep in 
Setup (p. 56).

 

While holding down ONE TOUCH [PIANO], press 
[SETUP].

[EDIT] and [NUM LOCK] are lit, and the following 
Piano Edit screen appears.

 

fig.04-01

 

Press CURSOR [

] or [

] to switch screens, and press 

CURSOR [

] or [

] to move the cursor to the 

parameter to be set.

 

Press [INC/YES] or [DEC/NO] to set the value.

 

When you finish making settings, press ONE TOUCH 
[PIANO].

 

This chooses the piano Tone to be selected when ONE 
TOUCH [PIANO] is pressed.

There are sixteen Tones to choose from.

 

Adjusts the spaciousness of the sound.

 

This changes the Tone’s subtle nuances by altering the phase 
of the left and right sounds.

 

Depending on the piano Tone selected, this setting may not 
be available.

 

This effect is difficult to hear when headphones are used.

 

Stereo Width

0–63

Changes the width of the 
sound. The higher the 
value set, the wider the 
sound is spread out.

 

Nuance

OFF, TYPE1, 2, 3

RD-700_e.book 66 ページ ２００４年４月２６日　月曜日　午前１１時５４分