Roland RD-700 业主指南

 

If the Beat Pattern (p. 86) is 1/4, there will be no shuffle effect 
even if the Shuffle Rate value is increased.

 

This sets how strongly sounds are played when you press the 
keys.

 

When the hold setting is switched on, you can have 
arpeggios continue to play even after you release the keys.

 

The [ARPEGGIO] indicator flashes when the Arpeggio Hold 
is set to ON.

 

The sixteen Parts played by the RD-700’s internal sound 
generator are referred to as “Internal Parts.”

Of the sixteen Internal Parts, you can select three of them to 
function as the three Parts (UPPER1, UPPER2, and LOWER) 
which can be freely controlled with the RD-700’s buttons and 
keyboard. These three Parts are collectively known as the 
“Local Parts.”

You can perform operations like Split and Layer with the 
Local Parts very simply using the RD-700’s keyboard, and 
you can make more detailed settings for the Parts as well.

 

Press [EDIT], getting the indicator to light.

The Edit Menu screen appears.

 

fig.Editmenu2.eps_150

 

Press CURSOR [

]/[

] to select “7.Local Part 

Param.”

 

Press CURSOR [

] to display the Edit screen.

 

fig.intext1.eps_150

fig.intext2.eps_150

fig.IntExt3-1.eps_150

 

Press CURSOR [

] or [

] to switch screens, and press 

CURSOR [

] or [

] to move the cursor to the 

parameter to be set.

 

Press [INC/YES] or [DEC/NO] to set the value.

You can set the “Key Range” by pressing the specified 
keys.

 

Velocity

REAL

Reproduces the actual strength of 
the keyboard touch.

1–127

Sets the velocity at a fixed valued, 
regardless of the keyboard touch.

 

Arpeggio Hold

ON

Arpeggios continue to play 
even after the keys are re-
leased.

OFF

Arpeggios stop playing 
when the keys are released.

Even when not in the Edit screen, you can use the 
buttons to turn the Hold function on and off.

1. Hold down [ARPEGGIO] and press [TRANSPOSE].

Hold is turned on or off each time the button is 
pressed.

RD-700_e.book 87 ページ ２００４年４月２６日　月曜日　午前１１時５４分