Roland RD-700 业主指南
97
Connecting External MIDI Devices
Connecting MIDI Devices
Playing the RD-700’s Internal
Sound Generator from an
External MIDI Device
Try Playing the RD-700 from an External MIDI Device.
Making connections
fig.
1.
Before starting the connection procedure, make sure that
the power to all devices has been turned off.
the power to all devices has been turned off.
2.
After reading
headphones.
3.
Connect the external MIDI device with the MIDI cable as
shown in the figure below.
shown in the figure below.
4.
the power of each device.
Setting the Channels
Set the RD-700’s receive channel to match the external MIDI
device’s transmit channel.
device’s transmit channel.
For instructions on setting the RD-700’s Receive channel,
refer to
refer to
When both channels are matched, playing the external MIDI
device produces sounds from the RD-700’s sound generator.
device produces sounds from the RD-700’s sound generator.
For instructions on how to set the transmit channel of the
external MIDI device, refer to the owner’s manual for your
external MIDI device.
external MIDI device, refer to the owner’s manual for your
external MIDI device.
Selecting RD-700 Sounds from an
External MIDI Device
External MIDI Device
Transmitting Bank Select (Controller Number 0, 32) and
Program Change messages from the external MIDI device to
the RD-700 allows you to switch Setups and Tones.
Program Change messages from the external MIDI device to
the RD-700 allows you to switch Setups and Tones.
Switching Setups
The MIDI messages transmitted by the external MIDI device
will be received by the RD-700 to select Setups as shown in
the following table.
will be received by the RD-700 to select Setups as shown in
the following table.
When switching setups, you must match the MIDI channel of
the transmitting device with the RD-700’s Control channel.
(p. 70)
the transmitting device with the RD-700’s Control channel.
(p. 70)
When switching the tones in each part, match the MIDI
channel of the transmitting device with the RD-700’s Receive
channel. However, when the Control channel and the
Receive channel are both set to the same channel, the Control
channel takes priority, and setups are switched.
channel of the transmitting device with the RD-700’s Receive
channel. However, when the Control channel and the
Receive channel are both set to the same channel, the Control
channel takes priority, and setups are switched.
Switching Tones
The MIDI messages transmitted by the external MIDI device
will be received by the RD-700 to select Tones as shown in
the following table.
will be received by the RD-700 to select Tones as shown in
the following table.
For details on the SRX Series, refer to the owner’s manual for
the SRX Series Wave Expansion Board.
the SRX Series Wave Expansion Board.
MIDI IN
MIDI OUT
MIDI Sequencer
RD-700
Number
Bank Select
Program Change
Number
MSB
LSB
1–100
85
0
1–100
Group
Number
Bank Select
Program
Change
Number
MSB
LSB
PIANO
001 – 019
087
064
001 – 019
E.PIANO
020 – 039
087
065
001 – 020
CALV/
MALLET
MALLET
040 – 059
087
066
001 – 020
ORGAN
060 – 089
087
067
001 – 030
STRINGS
090 – 109
087
068
001 – 020
PAD
110 – 129
087
069
001 – 020
GTR/
BASS
BASS
130 – 159
087
070
001 – 030
BRASS/
WINDS
WINDS
160 – 179
087
071
001 – 020
VOICE/
SYNTH
SYNTH
180 – 199
087
072
001 – 020
Rhythm
Set
Set
200 – 203
086
064
001 – 004
RD-700_e.book 97 ページ ２００４年４月２６日 月曜日 午前１１時５４分