Roland ac-90 业主指南

下载
页码 80
12
Names of Things and What They Do
Rear Panel
fig.040
1. LINE OUT Jacks
You can connect a mixer, recording device, or other device 
here. The output level is +4 dBu.
Included here are XLR connectors (L/R: stereo output) and a 
1/4” phone jack (mono output).
fig.090
* You cannot adjust the volume for LINE OUT with the 
MASTER knob.
* The chorus effects are designed so they exhibit the greatest 
effectiveness when you use the unit’s built-in speakers. 
Effectiveness may differ when LINE OUT is used instead of 
the built-in speakers.
2. SUB WOOFER OUT Jack
You can connect a powered subwoofer to play back sounds 
with an even punchier, more powerful low end.
The volume is adjusted with the MASTER knob.
3. AUX IN Jacks
You can connect a CD player, drum machine, or other device 
and play back sounds in stereo. Both RCA phono jacks and 
1/4” phone jacks are provided. When connected to only the 
left 1/4” phone jack, playback is in mono.
Although the input from AUX IN is output from the 
speakers, PHONES, and SUB WOOFER OUT, it is not output 
from LINE OUT. The volume is adjusted with the MASTER 
knob, and muting on/off for these sounds is controlled with 
5
4
3
1
2
White
Red
PCS-31
Anti-Feedback
Mute On/Off
White
Red
PCS-31
Reverb/Delay
On/Off
Chorus
On/Off
Tuner
Mixer
CD Player
Drum Machine
Powered 
Sub Woofer
Mixer
Recorder
When connection cables with resistors are used, the volume level of equipment connected to the inputs may be low.
If this happens, use connection cables that do not contain resistors.
*
926a
*
AC-90_egfispd.book  Page 12  Tuesday, August 14, 2007  10:09 AM