Roland RD-700SX 业主指南
33
Performing with the Keyboard
The RD-700SX provides 488 types of Tones.
Each one of these individual sounds is called a “tone.”
Tones are assigned to the TONE SELECT buttons according to the tone category
selected.
selected.
Try selecting and performing with a number of different tones.
fig.Q1-06p
1
Press ONE TOUCH [PIANO] or [E.PIANO].
This selects a single tone to be played over the entire keyboard.
2
Press any of the TONE SELECT buttons to select the tone category.
The TONE SELECT button for the selected category lights.
3
Press [INC]/[DEC] to select the tone.
Play the keyboard, and you will hear the selected tone.
The next time you choose this TONE SELECT button, the tone you’re selected here
is played.
is played.
Performing with a Variety of Tones
3
2
1
If multiple tones are playing,
do not press the ONE TOUCH
[PIANO] button, but instead
select the zone containing the
tone to be changed using the
ZONE SELECT buttons. Refer
to “Changing the Tone for a
Zone”
do not press the ONE TOUCH
[PIANO] button, but instead
select the zone containing the
tone to be changed using the
ZONE SELECT buttons. Refer
to “Changing the Tone for a
Zone”
If [NUM LOCK] is turned on,
the Tone Category cannot be
selected with TONE SELECT
button. For details, refer to p.
34.
the Tone Category cannot be
selected with TONE SELECT
button. For details, refer to p.
34.
Tones selected with [RHY/
GM2] are registered in the
following order: “Rhythm
Sets,” “GM2 Rhythm Sets,”
and “GM2 Tones.” Refer to the
“Tone List”
GM2] are registered in the
following order: “Rhythm
Sets,” “GM2 Rhythm Sets,”
and “GM2 Tones.” Refer to the
“Tone List”
RD-700SX_e.book 33 ページ ２００７年９月１２日 水曜日 午前１１時１０分