Roland RD-700SX 业主指南

下载
页码 180
 
74
Making Detailed Settings for the ONE TOUCH Tones
 
Reproduces the way the brightness of a grand piano’s sound is 
affected by how much the piano’s lid is opened.
This changes the sound of the instrument in a manner similar to that 
accomplished in recordings of miked acoustic instruments like 
pianos, where the sound is changed by using mics with different 
characteristics and changing the mic placement. This function is a 
virtual reproduction of these phenomena.
When the keys are pressed on an acoustic piano, the strings for keys 
that are already pressed also vibrate sympathetically. The function 
used to reproduce is called “String Resonance.”
This sets the midrange equalization.
You can make advanced settings for the touch used for the keys.
 
This setting is switched automatically according to the value of 
Key Touch Offset, which follows.
 
Changing this setting also changes the Key Touch setting in Edit 
Mode (p. 83).
 
Opening/Closing the Piano Lid 
(Lid)
 
Parameter
Value
Description
 
Lid
1–6
The lid is opened more as the 
value is increased, creating a 
brighter sound.
 
Changing the Characteristics of the 
Mic (Mic Type/Distance)
 
Parameter
Value
Description
 
Mic Type
OFF
No microphone is used.
CONDENSER
This is a simulation of a small 
condenser mic used for musical 
instruments. The mic features a 
very bright high end.
DYNAMIC
This simulates the type of 
dynamic mic used widely for 
vocals and instruments.
Distance
0–10
The distance to the microphone 
decreases as the value is raised, 
and the distance increases as the 
value is lowered.
 
Adjusting the Resonant Sounds 
When the Keys are Pressed 
(String Resonance)
 
Parameter
Value
Description
 
String Resonance
OFF, 1–5
Increasing the value will 
increase the amount of effect.
 
Making the Midrange Equalizer 
Settings (EQ SW/EQ Gain/EQ 
Frequency/EQ Q)
 
Parameter
Value
Description
 
EQ SW
ON, OFF
This determines whether the 
following EQ Gain, EQ Frequency, 
and EQ Q settings are enabled 
(ON), or not (OFF).
EQ Gain
-12.0–+12.0 dB
Change the amount of 
equalization (gain).
EQ 
Frequency
100, 125, 160, 
200, 250, 315, 
400, 500, 630, 
800, 1000, 1250, 
1600, 2000, 
2500, 3150, 
4000Hz
Set Frequency Point. Changes the 
level of the selected frequency 
range, with frequency selected 
here at the center.
EQ Q
0.5, 1.0, 2.0, 4.0, 
8.0
Adjusts the “Q” (bandwidth) of 
equalization. The higher the value, 
the narrower the range of 
frequencies that are affected.
 
Changing the Key Touch 
(Key Touch)
 
Parameter
Value
Description
 
Key Touch
SUPER 
LIGHT
An even lighter setting than 
LIGHT.
LIGHT
This sets the keyboard to a light 
touch. You can achieve fortissimo 
(ff) play with a less forceful touch 
than usual, so the keyboard feels 
lighter. This setting makes it easy 
to play, even for children.
MEDIUM
This sets the keyboard to the 
standard touch. You can play with 
the most natural touch. This is the 
closest to the touch of an acoustic 
piano.
HEAVY
This sets the keyboard to a heavy 
touch. You have to finger the 
keyboard more forcefully than 
usual in order to play fortissimo 
(ff), so the keyboard touch feels 
heavier. Dynamic fingering adds 
even more feeling to what you 
play.
SUPER 
HEAVY
An even heavier setting than 
HEAVY.
 
Parameter
Value
Description
RD-700SX_e.book 74 ページ 2007年9月12日 水曜日 午前11時10分