Roland RD-700SX 业主指南
80
Detailed Settings for Each Function ([EDIT])
For more on the following system function parameters, refer to
the corresponding pages.
the corresponding pages.
Master Tune
USB Driver
Adjusts the volume of the entire RD-700SX.
This setting determines whether or not the Setup equalizer settings
values are to be changed when Setups are switched.
values are to be changed when Setups are switched.
When this is set to SYSTEM, a “
” is displayed in the upper
right of each screen.
This setting determines whether or not the pedal settings are
switched to the values stored in the setup you are switching to.
switched to the values stored in the setup you are switching to.
When this is set to SYSTEM, a “
” is displayed in the upper
right of each screen.
Assigning the Pedal Function When
Pedal Mode is Set to “SYSTEM”
Pedal Mode is Set to “SYSTEM”
When this is set to SYSTEM, “Pedal Setting” appears in the lower
right of the screen. Pressing [F2] at this point calls up the screen for
the function assigned to the pedal.
right of the screen. Pressing [F2] at this point calls up the screen for
the function assigned to the pedal.
Adjusting the Volume
(Master Volume)
Parameter
Value
Master Volume
0-127
Preventing Equalizer Settings from
Being Switched (EQ Mode)
Parameter
Value
Description
EQ Mode
SETUP
Equalizer settings change when
Setups are switched.
Setups are switched.
SYSTEM
Equalizer settings do not change
when Setups are switched.
when Setups are switched.
Preventing Pedal Settings from
Being Switched (Pedal Mode)
Parameter
Value
Description
Pedal Mode
SETUP
Pedal settings change when Setups
are switched.
are switched.
SYSTEM
Pedal settings do not change when
Setups are switched.
Setups are switched.
Parameter
Value
Function/Parameter Setting
Changed
Changed
FC1
FC2
FC2
OFF
No control
CC01–CC31,
CC33–CC95
CC33–CC95
Controller Numbers 1–31,
33–95
33–95
96:
BEND-UP
BEND-UP
Raises the pitch (up to a
maximum of four octaves).
maximum of four octaves).
97:
BEND-DOWN
BEND-DOWN
Lowers the pitch (up to a
maximum of four octaves).
maximum of four octaves).
98:
AFTER TOUCH
AFTER TOUCH
After Touch
99:
OCTAVE UP
OCTAVE UP
Each pedal press raises the key
range in octave steps (up to 4
octaves higher).
range in octave steps (up to 4
octaves higher).
100:
OCTAVE DWN
OCTAVE DWN
Each pedal press lowers the
key range in octave steps (up to
4 octaves lower).
key range in octave steps (up to
4 octaves lower).
101:
START/STOP
START/STOP
Starts/Stops the external
sequencer.
sequencer.
102:
TAP TEMPO
TAP TEMPO
The tempo will be modified to
the interval at which you press
the pedal.
the interval at which you press
the pedal.
103:
RHY PLY/STP
RHY PLY/STP
104:
ARPEGGIO SW
ARPEGGIO SW
105:
MFX ON/OFF
MFX ON/OFF
Performs the same function as
MULTI EFFECTS [ON/OFF].
Switches the multi-effects (p.
52) on and off.
MULTI EFFECTS [ON/OFF].
Switches the multi-effects (p.
52) on and off.
106:
MFX CONTROL
MFX CONTROL
Adjusting the amount of the
multi-effects (p. 52).
multi-effects (p. 52).
107:
SNG PLY/STP
SNG PLY/STP
108:
SETUP-UP
SETUP-UP
Switches the Setups in
ascending order.
ascending order.
109:
SETUP-DOWN
SETUP-DOWN
Switches the Setups in
descending order.
descending order.
RD-700SX_e.book 80 ページ ２００７年９月１２日 水曜日 午前１１時１０分