Roland PCR-1 业主指南
44
Basic use
Input / output devices
In order to obtain the best performance from your software, you must make the appropriate
input/output device settings.
For details on these settings, refer to the owner’s manual for your software.
input/output device settings.
For details on these settings, refer to the owner’s manual for your software.
* If you are unable to select the PCR-1 in the device settings for your software, it is possible that the PCR-
1 driver was not installed correctly. Please reinstall the driver.
Audio Devices
Audio output device
EDIROL PCR-1
EDIROL PCR-1
This sends audio signals from your computer to the PCR-1. If you are using Media Player
you will normally choose this. You should also use this if you are using an application
such as SONAR in WDM driver mode or a Direct Sound application.
you will normally choose this. You should also use this if you are using an application
such as SONAR in WDM driver mode or a Direct Sound application.
MME EDIROL PCR-1 Out
This sends audio signals from your computer to the PCR-1. Use this if you are using an
application that does not have a WDM driver mode, or if you want to use 24-bit audio
with a non-ASIO application .
application that does not have a WDM driver mode, or if you want to use 24-bit audio
with a non-ASIO application .
* Windows XP/2000 only
Audio input devices
EDIROL PCR-1
EDIROL PCR-1
This receives audio signals sent from the PCR-1 to your computer. Normally, you should
use this. You should also use this when using an application such as SONAR in WDM
driver mode.
use this. You should also use this when using an application such as SONAR in WDM
driver mode.
MME EDIROL PCR-1 In
This receives audio signals sent from the PCR-1 to your computer. Use this if you are us-
ing an application that does not have a WDM driver mode, or if you want to use 24-bit
audio with a non-ASIO application .
ing an application that does not have a WDM driver mode, or if you want to use 24-bit
audio with a non-ASIO application .
* Windows XP/2000 only
ASIO device
EDIROL PCR-1
EDIROL PCR-1
Select “EDIROL PCR-1” as the ASIO setting for your application if you are using the
PCR-1 with an ASIO application such as Cubase.
PCR-1 with an ASIO application such as Cubase.
* To prevent audio loops from causing oscillation or double monitoring, turn monitoring off in
your application or use the ASIO Direct Monitor setting.
MIDI Devices
MIDI OUT device
PCR-1 (Mac OS 9: PCR-1 1)
PCR-1 (Mac OS 9: PCR-1 1)
This is the bulk reception port. When receiving bulk data into the PCR-1, select PCR-1 as
the output port for your sequencer software or other program.
the output port for your sequencer software or other program.
MIDI IN device
PCR-1 1
PCR-1 2
PCR-1 1
PCR-1 2
These ports receive messages from the keyboard, bender switch, and controllers.
The port assignment determines how the keyboard, bender switch, and controllers are
mapped to
The port assignment determines how the keyboard, bender switch, and controllers are
mapped to
PCR-1 1
or
PCR-1 2
.
You may find it convenient to select
PCR-1 1
for messages used for real-time perfor-
mance on a software synthesizer or for recording on a sequencer track, and select
PCR-1
2
for messages used to control a sequencer (e.g., sequencer start/stop, or track fader con-
trol).
PCR-1
2 is also the bulk transmission port. When transmitting bulk data from the
PCR-
1
, select
PCR-1 2
as the input port for your sequencer software.
PCR-1_e.book 44 ページ ２００４年３月１６日 火曜日 午後２時５５分