Roland PCR-1 业主指南

 

Use MIDI functionality

 

■

 

Here’s how to assign an Aftertouch message to a controller.

 

fig.edt2

 

Press the 

 

 button.

The display will indicate “EDT.”

 

fig.r-1

 

Slightly move the controller to which you want to assign an Aftertouch 
message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

 

Verify that the display shows the correct controller number, and press the 

 

 button.

 

fig.at1

 

Press an 

 

 key (

)  on the keyboard enough times 

to get "AT0" to appear in the display.

 

fig.c

 

Verify that the display is correct, and press the 

 

 button.

The display will indicate “C–”.

 

Input the channel. Use the 

 

 buttons or the 

 

– 

 

 keys to specify the channel.

 

Press the 

 

 button.

 

If you are making an assignment for a button, specify the button mode. 

(

 

➝

 

 

Basic mode

0

Channel Pressure

0-127 (00–7FH)

Port 1

Advanced mode 1

1

Channel Pressure

Assignable

Assignable

Advanced mode 2

2

Polyphonic Key Pressure

0-127 (00–7FH)

Port 1

Advanced mode 3

3

Polyphonic Key Pressure

Assignable

Assignable

*1 Reference

 

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 

of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value, 

or will blink if the value is different.

PCR-1_e.book 65 ページ ２００４年３月１６日　火曜日　午後２時５５分