Roland PCR-1 业主指南
95
System settings
H-ACTIVITY ON / OFF (Keyboard : 5)
fig.hyo
Perform steps 1-3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
or
[1]
keys to switch H-ACTIVITY
ON / OFF.
The display will indicate either “ON” or “OFF”.
The display will indicate either “ON” or “OFF”.
5.
Press the
[ENTER]
button.
USB MIDI DRIVER MODE (Keyboard : 6)
Perform steps 1-3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
or
[1]
keys to specify the USB MIDI DRIVER
MODE.
*
FPT = Fast Processing Technology for MIDI Transmission:
Effective use is made of the USB bandwidth according to the amount of MIDI data to be transmitted,
ensuring that MIDI data processing will always occur optimally.
ensuring that MIDI data processing will always occur optimally.
5.
Press the
[ENTER]
button.
STARTUP MEMORY (Keyboard : 7)
Perform steps 1–3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
or
[1]
keys to specify the GM2/LAST ACCESS
MEMORY setting.
5.
Press the
[ENTER]
button.
FACTORY RESET (Keyboard : 8)
Perform steps 1–3.
fig.rst
4.
The display will indicate “RST”.
fig.yes
5.
Press the
[ENTER]
button.
The display will blink “YES”.
6.
Press the
[ENTER]
button.
0
Original driver
FPT technology is used to perform high-speed MIDI trans-
fer. Normally, we recommend that you use this mode.
fer. Normally, we recommend that you use this mode.
1
Generic driver
Select this if you are using the standard MIDI driver provid-
ed by your operating system.
ed by your operating system.
0
GM2 MEMORY
When the PCR starts up, memory number 0 (GM2) will
be loaded into
be loaded into
current memory
state in which the power was turned off.
1
LAST ACCESS
MEMORY
MEMORY
Upon power-up, the PCR-1 will recall the memory that
was last recalled or saved into
was last recalled or saved into
current memory
0
OFF
1
ON
PCR-1_e.book 95 ページ 2004年3月16日 火曜日 午後2時55分