Roland PCR-300 业主指南

下载
页码 100
 
76
 
System settings
 
Here’s how to specify whether the MIDI connectors will be used as a MIDI interface.
 
1
 
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
 
2
 
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
 
3
 
Use the VALUE knob to select “SY08,” and press the [ENTER] button.
 
4
 
Use the VALUE knob or controllers [A1] or [A2] to specify the desired MIDI I/F 
setting.
The display will show the setting you specified.
 
5
 
Press the [ENTER] button to return to Play mode.
 
MIDI settings
 
MIDI I/F Switch
 
Controller
Indication
Setting
Summary
 
[A1 (0)]
 
OFF
 
MIDI messages received by the PCR keyboard 
will not be transmitted from the PCR. MIDI mes-
sages will be transmitted and received between 
the PCR and the computer, or between the PCR 
and the external MIDI device.
[A2 (1)]
 
ON
 
The MIDI connectors of the PCR keyboard will 
operate as a MIDI interface. MIDI messages 
from the computer that’s connected via USB to 
the PCR will be conveyed to the sound module 
connected to the PCR’s MIDI OUT connector. 
MIDI messages from the MIDI device connected 
to the PCR’s MIDI IN connector will be con-
veyed to the computer.
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
EDIROL PCR
EDIROL PCR MIDI OUT
MIDI OUT
MIDI IN
MIDI I/F MODE OFF
MIDI OUT device
MIDI IN device
Bulk reception
PORT 1
PORT 2 /
Bulk transmission
X
X
MIDI messages
USB
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
EDIROL PCR
EDIROL PCR MIDI OUT
MIDI OUT
MIDI IN
MIDI I/F MODE ON
PORT 1
PORT 2 /
USB
MIDI OUT device
MIDI IN device
Bulk reception
Bulk transmission
MIDI messages
PCR-300_500_800_e.book 76 ページ 2007年2月28日 水曜日 午後7時10分