Roland syb-5 业主指南
5
Panel Descriptions
* If this indicator goes dim or no longer lights while
an effect is ON, the battery is near exhaustion and
should be replaced immediately. For instructions on
changing the battery, refer to “Changing the
Battery” (p. 18).
should be replaced immediately. For instructions on
changing the battery, refer to “Changing the
Battery” (p. 18).
*
The CHECK indicator shows whether the effect
is being applied or not. It does not indicate
whether the power to the device is on or not.
is being applied or not. It does not indicate
whether the power to the device is on or not.
3. OUTPUT A (MONO) Jack,
OUTPUT B Jack
The output jacks are used to connect the unit
to amplifiers or other devices.
to amplifiers or other devices.
* For mono output, use OUTPUT A (MONO).
* For stereo use:
Output A:
Only the processed signal is output.
Output B:
Only the dry signal is output.
4. INPUT Jack
This jack accept input signal coming from a
bass.
bass.
* When running the unit on battery power, the INPUT
jack as power switch. Power to the unit is turned on
when you plug into the INPUT jack; the power is
turned off when the cable is unplugged. Be sure to
disconnect a cord plugged into the INPUT jack when
not using this effects device. When the AC adaptor is
used, the power remains on at all times, and this
function is disabled.
when you plug into the INPUT jack; the power is
turned off when the cable is unplugged. Be sure to
disconnect a cord plugged into the INPUT jack when
not using this effects device. When the AC adaptor is
used, the power remains on at all times, and this
function is disabled.
5. EXP Jack
Connect an expression pedal (the optional
Roland EV-5) here. You can then use the ex-
pression pedal to change the bass synth
sound.
Roland EV-5) here. You can then use the ex-
pression pedal to change the bass synth
sound.