Roland PCR-30 业主指南

Edit mode (EDIT)

Advanced mode 1 of CONTROL CHANGE ASSIGN lets you specify the upper and lower limits of the 
control change value in addition to the items of Basic mode.

1. Press the 

 button.

2. Slightly move the controller to which you want 

to assign a Control Change message. In the case 
of a button, press that button.
The display will indicate the number of 
the selected controller.

3. Confirm what’s indicated, and press the 

 button.

4. Press the 

 key and then 

press key 

.

The display will indicate “CC1”.

5. Press the 

 button.

6. Input the channel.

7. Press the 

 button.

8. Input the control change number.

9. Press the 

 button.

10. The following display will appear.

fig.max

*1 Reference

11. Use the 

 buttons or the 

–

 keys 

to specify the upper limit value.

12. Press the 

 button.

13. The following display will appear.

fig.min

*1 Reference

14. Use the 

 buttons or the 

–

 keys 

to specify the lower limit value.

15. Press the 

 button.

16. The display will indicate “P--”.

fig.p1

*1 Reference

17. Specify the output port. (➔

18. If you are making an assignment for a button, 

specify the button mode. (➔

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 

of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value, 

or will blink if the value is different.