Roland RD-700GX 用户指南

 

Overview of the RD-700GX

 

When changing settings values, you can use the [DEC] and [INC] buttons, VALUE dial, or the 
TONE SELECT buttons (numeric keys).

 

fig.00-G12p

 

Pressing the [INC] button increases the value, and the [DEC] 
button decreases it. 
If you want the value to continue changing, simply hold down 
the [DEC] button or [INC] button. For faster value increases, 
keep the [INC] button pressed down and press the [DEC] 
button. For decreasing value faster, keep the [DEC] button 
pressed down and press [INC] button.
Simultaneously pressing the [DEC] and [INC] buttons sets that 
parameter to the standard default value or switches it off.

 

Turn the dial clockwise to increase the value, or counter-
clockwise to decrease the value.

 

When the [NUM LOCK] button is on (lit), numerical values can 
be input directly using the TONE SELECT buttons, which then 
serve as the [0]–[9] button numeric keys. 
When you enter the number, the value will blink. This indicates 
that the value has not yet been finalized. To finalize the value 
press the [ENTER] button.
With some parameters, the [NUM LOCK] button may come on 
automatically, allowing you to input numerical values directly 
with the TONE SELECT buttons.

Only numerical values can be entered using the 
numeric keys. To switch the positive (+) or negative 
(-) signs for numerical values and make continuous 
changes in the numerical values, press the [DEC] 
or [INC] button.

RD-700GX_e.book 32 ページ ２００８年２月１３日　水曜日　午後５時４９分