Roland RD-700GX 用户指南
44
Performance
Changing the Keyboard’s Split Point
You can change the point at which the keyboard is divided (the Split Point) in Split mode.
1.
Hold down the [SPLIT] button for several seconds.
A screen such as the following appears, and the current value of the setting is displayed.
fig.Q1-18g
2.
Hold down the [SPLIT] button and press a key.
When you release the [SPLIT] button, the previous display will reappear.
The split-point key is included in the LOWER section.
The split-point key is included in the LOWER section.
When the split point is set, the Key Range (p. 92) in each zone is divided into left and right ranges
with the split point as the boundary, and the following values are set.
with the split point as the boundary, and the following values are set.
• UPPER 1, UPPER 2: Split Point+1–C8
• LOWER 1, LOWER 2: A0–Split Point
You can change the split point, adjusting it in semitone increments, by holding down
the [SPLIT] button and pressing the [DEC] [INC] buttons. You can also use the VALUE
dial to change the split point.
the [SPLIT] button and pressing the [DEC] [INC] buttons. You can also use the VALUE
dial to change the split point.
You can freely set whatever key ranges (registers) you
like to each zone.
For details, refer to “Setting the Key Range for Each Zone
(Key Range)” (p. 92).
like to each zone.
For details, refer to “Setting the Key Range for Each Zone
(Key Range)” (p. 92).
UPPER1
UPPER2
LOWER1
LOWER2
RD-700GX_e.book 44 ページ ２００８年２月１３日 水曜日 午後５時４９分