Roland RD-700GX 用户指南

 

Making Detailed Settings for the ONE TOUCH Tones

 

The typical E. Piano produces sound when a hammer strikes a 
metal rod called the tine with tone bar, whose vibrations are 
detected by a pickup. On this type of piano, the tonal 
character can be adjusted by changing the angle of the tone 
bars and pickups.
The RD-700GX can simulate this aspect of the system. 
Equivalent tonal changes can also be produced for E. Pianos 
that don’t use tone bars.

The typical E. Piano uses pickups to convert the vibrations of 
the tone bars into sound. By adjusting this parameter, you can 
obtain the effect of changing the distance between the tone 
bars and the pickups.
The RD-700GX simulates this aspect of the system. Equivalent 
tonal changes can also be produced for E. Pianos that don’t 
use tone bars.

This adjusts the balance between two components of the 
attack; the Bell component and the Thump produced by the 
hammer.

This adjusts the tonal character of the bell sound included in 
the attack.

This adjusts the damper noise (the noise heard when you press 
the damper pedal to release the tone bars).

Depending on the selected Tone Type (p. 82), this 
may have no effect.

This adjusts resonances such as the key-off sound (the faint 
sound heard when you release a key).

Depending on the selected Tone Type (p. 82), this 
may have no effect.

 

-10–0–
+10

Higher settings will 
emphasize the fundamental, 
producing a thicker sound.

 

-2–0–+2

Lowering this value will move 
the tone bars and pickups 
farther apart. This makes it 
easier for you to produce 
varied dynamics.
Increasing this value will 
produce a more powerful 
sound.

 

-10–0–
+10

Adjusting this value from 0 
toward the negative side will 
emphasize the bell sound, 
while adjusting it toward the 
positive side will emphasize 
the hammer sound.

 

-10–0–
+10

Adjusting this value from 0 
toward the negative side will 
produce a heavier character, 
while adjusting it toward the 
positive side will produce a 
lighter character.

 

-10–0–
+10

Increasing this value will 
make the damper noise 
louder.

 

-10–0–
+10

Higher values will produce a 
louder key-off sound.
At a setting of -10 there will 
be no key-off sound at all.

RD-700GX_e.book 83 ページ ２００８年２月１３日　水曜日　午後５時４９分