Roland RD-700GX 用户指南

 

Making Detailed Settings for Tones

 

You can use the MULTI EFFECTS 1 [CONTROL] knob and 
MULTI EFFECTS 2 [CONTROL] knob to control multi-effect 
parameters in real time.
Here you can specify which parameters are to be controlled.
The parameters available for control differ depending on the 
multi-effects assigned to MFX1 Type/MFX2 Type.

You can also make more detailed settings for the multi-effects. 
When you select a multi-effect type, the individual parameters 
for that type will be displayed.
For the values that can be edited, refer to “Effect/Parameter 
List” (p. 154).

Depending on the multi-effect type, lowering the 
volume of the part to which the multi-effect is 
applied may change the character of the effect. 
In this case, adjust the Level setting within the MFX 
parameters.

Please be aware that if the Feedback parameter is 
set to the minimum or maximum value, the sound 
may continue indefinitely.

This sets the pitch of the tone.

1 cent = 1/100 semitone

With some Tones, there may be ranges in which 
the pitch does not change as intended.

Portamento is a function that causes the pitch to change 
smoothly from one note to the next note played.
With the Mono/Poly parameter set to MONO, portamento is 
especially effective when simulating playing techniques such 
as a violin glissandos.
The Portamento Time setting determines the time for the 
change in pitch when the portamento effect is applied to the 
sound. Higher settings will cause the pitch change to the next 
note to take more time.

This sets the amount of pitch change that will occur when you 
move the Pitch Bend lever (2 octaves).

 

 

-48–+48 
(+/- 4 octaves)

Sets the sound’s pitch 
in semitone units. 

 

-50–+50 
(+/- 50 cents)

Sets the sound’s pitch 
in units of one cent. 

 

ON, OFF

 

0–127

 

0–24 (semitone)

RD-700GX_e.book 90 ページ ２００８年２月１３日　水曜日　午後５時４９分