Roland RD-300SX 补充手册

下载
页码 10
3
RD-300SX MIDI Implementation
OMNI OFF (Controller number 124)
Status
2nd byte
3rd byte
BnH
7CH
00H
n = MIDI channel number: 
0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received.
OMNI ON (Controller number 125)
Status
2nd byte
3rd byte
BnH
7DH
00H
n = MIDI channel number: 
0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received. OMNI ON will
not be turned on.
MONO (Controller number 126)
Status
2nd byte
3rd byte
BnH
7EH
mmH
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm = mono number:
00H - 10H (0 - 16)
*
The same processing will be carried out as when All Notes Off is received.
POLY (Controller number 127)
Status
2nd byte
3rd byte
BnH
7FH
00H
n = MIDI channel number: 
0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received.
System Realtime Message
Active Sensing
Status
FEH
*
When Active Sensing is received, the unit will begin monitoring the intervals of all further
messages. While monitoring, if the interval between messages exceeds 420 ms, the same
processing will be carried out as when All Sounds Off, All Notes Off and Reset All
Controllers are received, and message interval monitoring will be halted.
System Exclusive Message
Status
Data byte
Status
F0H
iiH, ddH, ......,eeH
F7H
F0H:
System Exclusive Message status
ii = ID number:
an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland’s manufacturer ID is 41H.
ID numbers 7EH and 7FH are extensions of the MIDI standard;
Universal Non-realtime Messages (7EH) and Universal Realtime
Messages (7FH).
dd,...,ee = data:
00H - 7FH (0 - 127)
F7H:
EOX (End Of Exclusive)
Of the System Exclusive messages received by this device, the Universal Non-realtime
messages and the Universal Realtime messages and the Data Request (RQ1) messages and the
Data Set (DT1) messages will be set automatically.
Universal Non-realtime System Exclusive Messages
Identity Request Message
Status
Data byte
Status
F0H
7EH, dev, 06H, 01H
F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
dev
Device ID (dev: 10H - 1FH (1 - 32), the initial value is 10H (17).)
06H
Sub ID#1 (General Information)
01H
Sub ID#2 (Identity Request)
F7H
EOX (End Of Exclusive)
*
GM1 System On
Status
Data byte
Status
F0H
7EH, 7FH, 09H, 01H
F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
7FH
Device ID (Broadcast)
09H
Sub ID#1 (General MIDI Message)
01H
Sub ID#2 (General MIDI 1 On)
F7H
EOX (End Of Exclusive)
GM2 System On
Status
Data byte
Status
F0H
7EH 7FH 09H 03H
F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
7FH
Device ID (Broadcast)
09H
Sub ID#1 (General MIDI Message)
03H
Sub ID#2 (General MIDI 2 On)
F7H
EOX (End Of Exclusive)
GM System Off
Status
Data byte
Status
F0H
7EH, 7F, 09H, 02H
F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
7FH
Device ID (Broadcast)
09H
Sub ID#1 (General MIDI Message)
02H
Sub ID#2 (General MIDI Off)
F7H
EOX (End Of Exclusive)
Universal Realtime System Exclusive Messages
Master Volume
Status
Data byte
Status
F0H
7FH, 7FH, 04H, 01H, llH, mmH
F7H
Byte
Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
04H
Sub ID#1 (Device Control messages)
01H
Sub ID#2 (Master Volume)
llH
Master Volume lower byte
mmH
Master Volume upper byte
F7H
EOX (End Of Exclusive)
*
The lower byte (llH) of Master Volume will be handled as 00H.
*
The Master Volume parameter (EDIT:System:Master Volume) will change.
Master Fine Tuning
Status
Data byte
Status
F0H
7FH, 7FH, 04H, 03H, llH, mmH 
F7H
Byte
Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
04H
Sub ID#1 (Device Control)
03H
Sub ID#2 (Master Fine Tuning)
llH
Master Fine Tuning LSB
mmH
Master Fine Tuning MSB
F7H
EOX (End Of Exclusive)
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])