Roland pcr-a30 业主指南

 

Getting Connected and Installing Drivers (Macintosh)

 

■

 

Use the following procedure to connect the PCR-A30 to your computer.

 

With the 

 

 turned 

 

, connect the  included 

 

 

to the 

 

.

 

Connect the 

 

 to an electrical outlet.

 

Use the 

 

 to connect the 

 

 to your 

 

.

 

Set the PCR-A30’s power switch to the 

 

 position, and turn on the 

power.

 

Open 

 

 and click 

 

.

 

In the 

 

 tab, set 

 

 to 

 

.

 

In the 

 

 tab, set 

 

 to 

 

.

 

In the 

 

 tab, set 

 

 to 

 

.

When you have finished making settings, close the dialog box.

Once the connections have 
been completed, turn on 
power to your various 
devices in the order 
specified. By turning on 
devices in the wrong 
order, you risk causing 
malfunction and/or 
damage to speakers and 
other devices.

This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.

Although “44.1 kHz” is 
used for the purpose of 
explanation within this 
document, this changes 
depending on the actual 
setting of the sampling 
frequency select switch

 

Once set this way, all 
sounds from your 
Macintosh (including 
audio alerts) will be output 
only through the PCR-A30, 
not from the speakers of 
your Macintosh.

Before using the PCR-A30 with your software, please note the following points.

• Turn on the power of the PCR-A30 before you start up your software.
• Do not disconnect the USB cable from the PCR-A30 or power-off the PCR-

A30 while your software is running.

• Quit your software before you power-off the PCR-A30.
• Turn off the Sleep function of your Macintosh.
• The PCR-A30 will not operate in the Mac OS X Classic environment. Use the 

PCR-A30 when the Classic environment is not running.

PCR-A30_e2.book 26 ページ ２００３年１０月２２日　水曜日　午後３時１９分