Roland pcr-a30 业主指南
38
Basic use
Input/output devices
In order to obtain the best performance from your software, you must make the appropriate
input/output device settings.
For details on these settings, refer to the owner’s manual for your software.
input/output device settings.
For details on these settings, refer to the owner’s manual for your software.
* If you are unable to select the PCR-A30 in the device settings for your software, it is possible that the
PCR-A30 driver was not installed correctly. Please reinstall the driver.
●
Audio Devices
Audio output device
EDIROL PCR-A
EDIROL PCR-A
This sends audio signals from your computer to the PCR-A30. If you are using Media
Player you will normally choose this. You should also use this if you are using an ap-
plication such as SONAR in WDM driver mode or a Direct Sound application.
Player you will normally choose this. You should also use this if you are using an ap-
plication such as SONAR in WDM driver mode or a Direct Sound application.
MME EDIROL PCR-A Out
This sends audio signals from your computer to the PCR-A30. Use this if you are using
an application that does not have a WDM driver mode, or if you want to use 24-bit au-
dio with a non-ASIO application .
an application that does not have a WDM driver mode, or if you want to use 24-bit au-
dio with a non-ASIO application .
* Windows XP/2000 only
Audio input devices
EDIROL PCR-A
EDIROL PCR-A
This receives audio signals sent from the PCR-A30 to your computer. Normally, you
should use this. You should also use this when using an application such as SONAR in
WDM driver mode.
should use this. You should also use this when using an application such as SONAR in
WDM driver mode.
MME EDIROL PCR-A In
This receives audio signals sent from the PCR-A30 to your computer. Use this if you are
using an application that does not have a WDM driver mode, or if you want to use 24-
bit audio with a non-ASIO application .
using an application that does not have a WDM driver mode, or if you want to use 24-
bit audio with a non-ASIO application .
* Windows XP/2000 only
ASIO device
EDIROL PCR-A
EDIROL PCR-A
Select
“EDIROL PCR-A”
as the ASIO setting for your application if you are using the
PCR-A30 with an ASIO application such as Cubase.
* To prevent audio loops from causing oscillation or double monitoring, turn monitoring off in
your application or use the ASIO Direct Monitor setting.
●
MIDI Devices
MIDI OUT device
PCR-A MIDI OUT (Mac OS 9: PCR-A MIDI IN, OUT)
PCR-A MIDI OUT (Mac OS 9: PCR-A MIDI IN, OUT)
If you specify PCR-A MIDI OUT as the output port for your sequencer software, mes-
sages will be transmitted from the MIDI OUT connector of the PCR-A30 itself.
sages will be transmitted from the MIDI OUT connector of the PCR-A30 itself.
PCR-A (Mac OS 9: PCR-A 1)
Select this port if you want to send messages from your sequencer software to the PCR-
A30 itself.
A30 itself.
MIDI IN device
PCR-A MIDI IN (Mac OS 9: PCR-A MIDI IN, OUT)
PCR-A MIDI IN (Mac OS 9: PCR-A MIDI IN, OUT)
If you specify PCR-A MIDI IN as the input port for your sequencer software, messages
will be input from the PCR-A30’s MIDI IN connector.
will be input from the PCR-A30’s MIDI IN connector.
PCR-A 1
PCR-A 2
PCR-A 2
Select one of these ports if you want messages from the controllers to be received by
your sequencer software. For each controller you can select the port that will be used.
You may find it convenient (for example) to use
your sequencer software. For each controller you can select the port that will be used.
You may find it convenient (for example) to use
PCR-A 1
for messages to be recorded
on a track or used to control a software synthesizer, and
PCR-A 2
for messages used to
play back/stop your sequencer or perform mixing.
PCR-A30_e2.book 38 ページ ２００３年１０月２２日 水曜日 午後３時１９分