Roland pcr-a30 业主指南
53
Using the PCR-A30 as a MIDI controller
Assign MIDI messages
(EDIT)
You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
You will use Edit mode to assign MIDI messages.
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to
●
Edit mode ( EDIT )
fig.EDIT-1_60
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “ EDT”.
2
Use the controllers or keyboard to select the item you want to set.
You can copy assigned messages to another
controller, or cancel an assignment. For de-
tails, refer to
controller, or cancel an assignment. For de-
tails, refer to
NOTE
AFTERTOUCH
CONTROL CHANGE
PROGRAM CHANGE
RPN
NRPN
Sys Ex
TEMPO (20-250)
1
2
How Basic mode and Advanced mode differ
The assignment s “NOTE“, “AFTERTOUCH“, “CONTROL CHANGE“, “PROGRAM
CHANGE“
CHANGE“
, “RPN“, “NRPN“, “Sys.Ex“ can be made either in Basic mode or Advanced
mode
.
Use the mode that is appropriate for your purpose.
• Basic mode:
You can make assignments easily, with the minimum number of steps.
• Advanced mode:A greater number of steps are required, but you can specify more
parameters and make more sophisticated assignments.
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
PCR-A30_e2.book 53 ページ ２００３年１０月２２日 水曜日 午後３時１９分