Roland pcr-a30 业主指南

 

Using the PCR-A30 as a MIDI controller

 

■

 

Here’s how you can assign an RPN or NRPN message to a controller.

 

fig.edt

 

Press the 

 

 button.

The display will indicate “EDT”.

 

fig.r-1

 

Slightly move the controller to which you want to assign an RPN or NRPN 
message. In the case of a button, press that button.
The display will indicate the number of the selected controller.

 

Confirm what’s indicated, and press the 

 

 button.

 

fig.rp0

 

Press the 

 

 key.

The display will indicate “RP0”.

 

fig.np0

 

fig.c

 

Confirm what’s indicated, and press the 

 

 button.

The display will blink “C–”.

 

Input the channel. Use the 

 

 buttons or the 

 

–

 

 keys to specify the channel.

 

Press the 

 

 button.

 

fig.BANK-2

 

Use the 

 

 buttons or the 

 

–

 

 keys to specify the RPN MSB 

(CC#101) or NRPN MSB (CC#99).

 

Press the 

 

 button.

 

fig.BANK-3

 

Use the 

 

 buttons or the 

 

–

 

 keys to specify the RPN LSB 

(CC#100) or NRPN LSB (CC#98).

 

Press the 

 

 button.

 

If you are making an assignment for a button, specify the button mode. 

(

 

➔

 

 

Basic mode

0

0-127 (00–7FH)

Not transmitted

PORT 1

Advanced mode 1

1

Assignable

00–7FH

Assignable

*1 Reference

*1 Reference

*1 Reference

 

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 

of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value, 

or will blink if the value is different.

PCR-A30_e2.book 64 ページ ２００３年１０月２２日　水曜日　午後３時１９分