Roland pcr-a30 业主指南
77
Using the PCR-A30 as a MIDI controller
Transmitting/receiving bulk data
(BULK)
Bulk dump allows a large amount of data to be transferred in a single operation. For example, this
can be used to store all settings of a device into a computer or sequencer.
can be used to store all settings of a device into a computer or sequencer.
*
When you transmit or receive Bulk data, the contents of the current memory will be lost. Save the current
memory settings as needed before you perform this operation.
memory settings as needed before you perform this operation.
●
Receive mode
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “EDT”.
fig.blr
2
Press the
[BULK]
key.
The display will blink “BLR” (Bulk Receive).
fig.rs
3
The dConfirm what’s indicated and press the
[ENTER]
button.
isplay will indicate “RS”, and the “S” will blink.
4
Use the
[DEC]
[INC]
buttons or the
[0]
[1]
keys to select the mode.
fig.rs1
5
Confirm what’s indicated and press the
[ENTER]
button.
The third digit of the display will blink, and the PCR-A30 will wait to receive
bulk data.
bulk data.
0
SINGLE BULK
The received data will overwrite the current mem-
ory. Memories 1–F will not be affected.
ory. Memories 1–F will not be affected.
1
ALL BULK
The received data will overwrite memories 1–F.
PCR-A30_e2.book 77 ページ 2003年10月22日 水曜日 午後3時19分