Roland pcr-a30 业主指南
82
System settings
●
SYSTEM
Here’s how you can make various system settings for the PCR-A30.
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “EDT”.
2
Press the
[SYSTEM]
key.
The display will indicate “SY0”.
fig.sy0
3
Use the
[0]
–
[8]
,
[A]
–
[E]
keys to specify the System setting that you want to set,
and then press the
[ENTER]
button.
Confirm what’s indicated and use the appropriate method to make the setting.
Mode
Key-
board
board
Content of the setting
Default
Setting
method
method
F8 CLOCK ON/OFF
0
Specify whether F8 Clock is to be transmitted.
OFF
F8 CLOCK DEFAULT
TEMPO
TEMPO
1
If
“F8 CLOCK ON/OFF”
is ON, specify the default value
of the F8 Clock. After the power is turned on, this tempo
will continue to be output until you move a controller to
which TEMPO is assigned.
will continue to be output until you move a controller to
which TEMPO is assigned.
120
F8 CLOCK PORT SET
2
If
“F8 CLOCK ON/OFF”
is ON, specify the port from
which the F8 Clock is to be transmitted.
PORT 1
VELOCITY OFFSET
3
The value you specify here will be added to the velocity
of the notes played from the keyboard.
* If the result of the addition would exceed 7FH, the ve-
of the notes played from the keyboard.
* If the result of the addition would exceed 7FH, the ve-
locity will be 7FH.
0
KEYBOARD PORT SET
4
Specify the port from which messages produced by the
BENDER lever of the keyboard are to be transmitted.
BENDER lever of the keyboard are to be transmitted.
PORT 1
H-ACTIVITY ON/OFF
5
Turn this ON if you are using certain applications (such
as Pro Tools LE).
When ON,
as Pro Tools LE).
When ON,
“90 00 7F”
will be output from PCR 2 approx-
imately every 500 ms.
OFF
USB MIDI DRIVER
MODE
MODE
6
Specify the type of USB MIDI driver used for USB connec-
tion.
tion.
Original
Driver
STARTUP MEMORY
7
Specify the memory that will be selected when the power
is turned on.
is turned on.
GM2
FACTORY RESET
8
Restore all settings of the PCR-A30 to their factory-set
condition.
condition.
-
USB AUDIO ON/OFF
A
Switch the USB AUDIO functionality on/off.
* The setting will take effect the next time you turn on the
* The setting will take effect the next time you turn on the
power
ON
USB AUDIO MODE
SETTING
SETTING
B
Specify the USB AUDIO sampling frequency and driver
mode.
* The setting will take effect the next time you turn on the
mode.
* The setting will take effect the next time you turn on the
power.
44.1kHz
(ADVANCE)
DIRECT MONITOR
ON/OFF
ON/OFF
C
Make Direct Monitor settings (Sending the input signal
from the audio input jacks directly to the PCR-A30’s
speakers or headphone jack).
from the audio input jacks directly to the PCR-A30’s
speakers or headphone jack).
ON
INPUT GAIN
D
Select either LINE, GUITAR, or MIC according to the de-
vice connected to the audio input jacks.
vice connected to the audio input jacks.
LINE
SPEAKER ON/OFF
E
Switch the PCR-A30’s speaker function on/off.
ON
PCR-A30_e2.book 82 ページ ２００３年１０月２２日 水曜日 午後３時１９分