Roland pcr-m1 业主指南
12
Names of things and what they do
Panel
Value knob
This knob controls the parameter that is assigned by the system settings. Turning the encoder
specifies the value.
specifies the value.
SHIFT Button
Use this in conjunction with other buttons
MEMORY / PGM CHANGE Button
MIDI CH / BANK SEL Button
EDIT Button
Used to assign MIDI messages to the controllers.
Display
Indicates the current status and various other information.
Press the [MEMORY] Button
Accesses memories that are stored within the PCR-M1.
Press the
[SHIFT]
so it is lit, and
then press the
[MEMORY]
.
Transmits program change messages on the current channel.
Press the [MIDI CH] Button
Specifies the transmission channel (
“current channel”
) for the
keyboard and bender.
Press the
[SHIFT]
so it is lit, and
then press the
[MIDI CH]
.
Transmits bank select messages on the current channel.
Number
Indicates the current value of the function assigned to the VALUE encoder by the sys-
tem parameter settings.
In addition, operating a controller will cause its current value to appear in the display
for a time.
tem parameter settings.
In addition, operating a controller will cause its current value to appear in the display
for a time.
USB
Lights if the PCR-M1 is connected to your computer via USB.
DATA OUT
This will blink when MIDI messages are transmitted via USB or MIDI OUT.
HEX
Lights when the value shown in the display is hexadecimal.
fig.panel-1
1
6
2
4
3
5
1
2
3
4
5
6
PCR-M1_e.book 12 ページ 2007年2月5日 月曜日 午前11時19分