Roland pcr-m1 业主指南
15
Names of things and what they do
Rear Panel
Security Slot(
)
http://www.kensington.com/
Controllers [EXPRESS (P2)] and
[HOLD(P1)]
You can connect the appropriate type of pedals to these jacks and use them as controllers.
* * Use the included converter cables to connect your pedals.
MIDI IN/OUT connectors
These can be connected to the MIDI connectors of other MIDI devices to transmit and receive
MIDI messages.
MIDI messages.
Power switch
USB connector
Use this when connecting the PCR-M1 to your computer via a USB cable.
AC adaptor jack
Connect the AC adaptor to this jack. Insert the plug firmly so it won’t get unplugged
accidentally.
accidentally.
P1 HOLD
Connect a pedal switch to this jack and use it as a Hold pedal.
P2 EXPRESS
Connect an expression pedal to this jack and use it to control tone or volume in real time.
DC
Power-on status when using the AC adaptor or batteries
* If the AC adaptor is connected and batteries are inserted, the power supplied by the AC adap-
* If the AC adaptor is connected and batteries are inserted, the power supplied by the AC adap-
tor is used. If you disconnect the AC adaptor, the power supplied by the batteries is used.
OFF
Power is off
USB
Power on using a USB cable (when not using the AC adaptor or batteries)
* USB(=BUS power) can be used when the PCR-M1 is connected to your computer via a USB
* USB(=BUS power) can be used when the PCR-M1 is connected to your computer via a USB
cable. In this case, the power will be supplied from your computer via the USB cable. To use
the PCR-M1 with bus power, set the power switch to USB.
the PCR-M1 with bus power, set the power switch to USB.
* For some computers, the PCR-M1 may not operate if bus power is used. In this case, use the included
AC adaptor.
fig.rear
18
19
20
23
24
21
22
18
19
20
21
22
23
24
PCR-M1_e.book 15 ページ 2007年2月5日 月曜日 午前11時19分