Roland pcr-m1 业主指南
32
Getting Connected and Installing Drivers (Macintosh)
■
Mac OS settings
If you’re using the PCR as a MIDI interface (i.e., connected to an external
MIDI device), make settings as described below. For a connection diagram,
refer to “
MIDI device), make settings as described below. For a connection diagram,
refer to “
USB connections with your computer
1
Use the USB cable to connect the PCR to your computer.
1.
Set the PCR’s power switch to the
“OFF”
position.
2.
Use the USB cable to connect the PCR to your computer.
3.
Set the PCR’s power switch to the
“USB”
position.
* Connect the cable to the USB connector of the Macintosh itself, not to the USB
connector of the keyboard.
2
Open the
Applications
folder of your Macintosh hard disk. In the
Utilities
folder, double-click
Audio MIDI Setup
to open the
Audio MIDI Setup
.
3
Click the
MIDI Devices
tab.
4
Click
Add Device
.
New external device
will appear.
5
Connect the
▼
and
▲
symbols (which signify the outputs and inputs) of the
EDIROL PCR
icon to those of the
New External Device
icon by using the
mouse to drag between them.
* Change icons and set other items according to the MIDI devices that are connected to the PCR’s
MIDI connectors. If you double-click
new external device
, the
new external device
Properties
dialog box will appear, allowing you to specify a variety of things, such as the device
name.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
5
Click MIDI Devices
3
Click Add Device
4
Use the mouse to drag
a connection
PCR-M1_e.book 32 ページ 2007年2月5日 月曜日 午前11時19分