Roland pcr-m1 业主指南
96
V-LINK mode
When the [SHIFT] button is lit (SHIFT ON), pressing the
[V-LINK] button (B3)
will
make the PCR-M1 transmit a V-LINK ON message and enter V-LINK mode. When you
press the
press the
[V-LINK] button
once again, the PCR will transmit a V-LINK OFF message
and will exit V-LINK mode.
When the PCR enters V-LINK mode, it transmits the following messages to the V-
LINK host.
LINK host.
•
Clip Ctrl Rx MIDI ch: 16
•
Color Ctrl Rx MIDI ch: 16
•
Sender Model Name: EDIROL PCR
Set the MIDI channel to “16” for parameters that you want to control via V-LINK.
PCR-M1_e.book 96 ページ 2007年2月5日 月曜日 午前11時19分