Roland RS-70 业主指南
133
Performing with an external MIDI device
Performing with an
external MIDI device
Rhythm Set
Using an external MIDI controller to
change the RS-70’s tones
Use of the Modulation lever, pedals, and control knobs to make
changes to the RS-70’s tones in real time is explained in
changes to the RS-70’s tones in real time is explained in
Transmitting Controller numbers set with Modulation Assign (p.
126), Pedal Control Assign (p. 126), and Knob Assign (p. 126) to the
RS-70 achieves the same effect as working the Modulation lever,
pedals, and knobs.
126), Pedal Control Assign (p. 126), and Knob Assign (p. 126) to the
RS-70 achieves the same effect as working the Modulation lever,
pedals, and knobs.
Recording to an external
sequencer
Now, try using an external sequencer to record your music onto
multiple tracks, and then play back the recorded performance.
multiple tracks, and then play back the recorded performance.
Connecting to an external sequencer
fig.r10-20.e
1.
Before starting the connection procedure, make sure that
the power to all devices has been turned off.
2.
3.
Connect the external MIDI sound device with a MIDI cable as
shown in the figure below.
4.
power of each device.
Making settings before recording
When recording to an external sequencer, the following steps must
be carried out.
be carried out.
•
Set the RS-70’s Local Control to OFF (refer to the next section).
•
•
Setting the RS-70’s local control to OFF
The setting that determines whether the keyboard controller section
(p. 50) and sound generator section are separated is referred to as
“
(p. 50) and sound generator section are separated is referred to as
“
Local Control
.”
When Local Control is on, playing the keyboard will produce sound,
and moving the pitch bend lever will control the pitch.
and moving the pitch bend lever will control the pitch.
When Local Control is off, playing the keyboard will not produce
sound, and moving the pitch bend lever will not control pitch. The
sound generator of the RS-70 will produce sound only in response to
messages received from an external MIDI device.
sound, and moving the pitch bend lever will not control pitch. The
sound generator of the RS-70 will produce sound only in response to
messages received from an external MIDI device.
fig.r10-21.e
The performance data from the RS-70’s keyboard controller section
is output from the MIDI OUT connector and recorded by the
sequencer. This performance data is then also output back to the RS-
70 from the sequencer’s MIDI OUT connector and played by the RS-
70’s sound generator.
is output from the MIDI OUT connector and recorded by the
sequencer. This performance data is then also output back to the RS-
70 from the sequencer’s MIDI OUT connector and played by the RS-
70’s sound generator.
If Local Control were ON, each note would be played twice; once by
the music data from the keyboard controller section, and once again
by the data sent from the sequencer. In order to prevent such double
triggering, the Local Control setting is turned off to separate the
keyboard controller section from the sound generating section.
the music data from the keyboard controller section, and once again
by the data sent from the sequencer. In order to prevent such double
triggering, the Local Control setting is turned off to separate the
keyboard controller section from the sound generating section.
* If your sequencer does not have a Thru function, set the RS-70’s Local
Control to ON.
1.
Press [SYSTEM] so it is lit.
Group
Number
Bank Number
Program
Number
Number
MSB
LSB
User
001–016
086
000
001–016
Preset
001–030
086
064
001–030
GM Rhythm
001–009
120
000
001–057
MIDI IN
MIDI OUT
MIDI IN
MIDI OUT
MIDI Sequencer
RS-70
Keyboard Controller
Section
Section
While at this setting,
the RS-70's keyboard
and controllers are
disconnected from
the sound generating
section, so they will not
directly control it.
the RS-70's keyboard
and controllers are
disconnected from
the sound generating
section, so they will not
directly control it.
Sound Generating
Section
Section
All performance data
that arrives at MIDI IN
will be output from
MIDI OUT.
that arrives at MIDI IN
will be output from
MIDI OUT.
Recording
RS-70
Sequencer
MIDI IN
MIDI OUT
MIDI OUT
MIDI IN
Set Thru
Function to On.
Function to On.
Set Local
Control to Off.
Control to Off.
RS-70_e4.book 133 ページ 2003年8月18日 月曜日 午前9時47分