Roland RS-70 业主指南
83
Using the sequencer to create patterns (Pattern mode)
Pattern Mode
Convenient functions for
pattern editing (Pattern Utility)
Pattern Utility provides various functions that you will find
convenient when editing patterns, allowing you to do things such as
copy or initialize a pattern.
convenient when editing patterns, allowing you to do things such as
copy or initialize a pattern.
1.
Press [PATTERN] so it is lit and you are in Pattern mode.
2.
Select a pattern.
3.
Press [UTILITY].
4.
Use PAGE/CURSOR [
]/[
] to select an item from the
following utility menu.
For details on each menu, refer to the corresponding reference
page.
page.
1:
2:
3:
4:
5:
6:
7:
8:
9:
12: PTN
→
5.
Press [ENTER].
6.
Use PAGE/CURSOR [
]/[
] to select a parameter, and
use VALUE [-]/[+] to specify the value.
* For parameters that allow you to specify a range, you can press PAGE/
CURSOR [
] to move the cursor.
7.
When you have finished making all settings, press [ENTER]
to execute the function.
8.
Press [EXIT] to return to the previous screen.
fig.r06-56.e
Erasing unwanted performance data
(PTN ERASE)
This operation erases all or part of the performance data from a
pattern. The performance data that is erased will be replaced by
rests, so the measures will remain.
pattern. The performance data that is erased will be replaced by
rests, so the measures will remain.
fig.r06-58_40
Part
Specifies the part(s) from which you wish to erase data.
If you choose “ALL,” all parts will be specified.
Value:
ALL, 1–16
You can also select the part by pressing [0]–[9] or by holding
down [SHIFT] and pressing [1]–[6].
down [SHIFT] and pressing [1]–[6].
Meas (Measure)
Sets the range of measures from which data will be erased.
VALUE
Meas:
Specifies the measure at which erasure is to begin.
for:
Specifies the number of measures from which data is
to be erased. If you select “ALL,” data from the
measure you specified for
to be erased. If you select “ALL,” data from the
measure you specified for
Meas
to the last measure
of the pattern will be erased.
Event
Specifies the type of music data that you wish to erase.
VALUE
ALL:
All music data
NOTE:
Note (C-1–G 9)
Specify the range of notes. You can also press keys
on the keyboard to specify the range.
on the keyboard to specify the range.
P.AFT:
Polyphonic Aftertouch
C.C.:
Controller numbers (0–127)
PROG:
Program numbers (1–128)
C.AFT:
Channel Aftertouch
BEND:
Pitch Bend
SYS-EX:
System Exclusive
TUNE:
Tune Request
This means you are changing
the performance data in the pattern.
the performance data in the pattern.
RS-70_e4.book 83 ページ ２００３年８月１８日 月曜日 午前９時４７分